Template:SMS Create Nodestrings and Breaklines Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
:# Select the [[SMS:2D Mesh Module Tools#Create Nodestrings|'''Create Nodestring''']] [[File:SMS Create Nodestring tool.png]] tool or [[SMS:Scatter Module Tools#Create Breaklines|'''Create Breakline''']] [[File:SMS Create Nodestring tool.png]] tool (depending on the module).
:# Select the [[SMS:Scatter Module Tools#Create Breaklines|'''Create Breakline''']] [[File:SMS Create Nodestring Tool.svg|16 px]] tool.
:# Click along points of a common feature, such as a bank toe or levee crest, to connect these points in the surface.
:# Click along points of a common elevation, such as at a bank toe or levee crest, to connect these points in the surface.
:# Use the ''Backspace'' key to back up if an erroneous selection is made.
:# Use the ''Backspace'' key to back up if an erroneous selection is made.
:# Double-click or press ''Enter'' key to complete the nodestring/breakline.<noinclude>[[Category:SMS Workflow Templates|break]]</noinclude>
:# Double-click or press ''Enter'' key to complete the breakline.<noinclude>[[Category:SMS Workflow Templates|break]]</noinclude>

Latest revision as of 15:44, 10 April 2018

  1. Select the Create Breakline SMS Create Nodestring Tool.svg tool.
  2. Click along points of a common elevation, such as at a bank toe or levee crest, to connect these points in the surface.
  3. Use the Backspace key to back up if an erroneous selection is made.
  4. Double-click or press Enter key to complete the breakline.