User:Jcreer/MDOFLOW 6 New Packages

From XMS Wiki
Jump to navigationJump to search

MF6 BUY Package

The Buoyancy (BUY) Package dialog

The Buoyancy (BUY) Package dialog is accessed by double-clicking on the BUY package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • Comments – Turn on to make the Comments section visible.
    • Options – Turn on to make the Options section visible.
    • PACKAGEDATA – Turn on to make the PACAKGEDATA section visible. This section is on by default.
  • Comments section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • Options section – Temporal options and settings:
    • HHFORMULATION_RHS
    • DENSEREF
    • DENSITY FILEOUT
  • PACKAGEDATA section – Contains the following:
    • Add Rows
    • IRHOSPEC
    • DRHODC
    • CRHOREF
    • MODELNAME
    • AUXSPECIESNAME


MF6 CSUB Package

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog is accessed by double-clicking on the CSUB package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
    • DATA – Turn on to make the DATA section visible. This section is on by default.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • BOUNDNAMES
    • PRINT_INPUT
    • SAVE_FLOWS
    • GAMMAW
    • BETA
    • HEAD_BASED
    • INITIAL_PRECONSOLIDATION_HEAD
    • NDELAYCELLS
    • COMPRESSION_INDICES
    • UPDATE_MATERIAL_PROPERTIES
    • CELL_FRACTION
    • SPECIFIED_INITIAL_INTERBED_STATE
    • SPECIFIED_INITIAL_PRECONSOLIDATION_STRESS
    • SPECIFIED_INITIAL_DELAY_HEAD
    • EFFECTIVE_STRESS_LAG
    • STRAIN_CSV_INTERBED
    • STRAIN_CSV_COARSE
    • COMPACTION
    • COMPACTION_ELASTIC
    • COMPACTION_INELASTIC
    • COMPACTION_COARSE
    • ZDISPLACEMENT
    • PACKAGE_CONVERGENCE
    • TS6 FILEIN
    • OBS6 FILEIN
  • GRIDDATA section – Contains the following:
    • Dataset to Array...
    • CG_SKE_CR
    • CG_THETA
    • SGM
    • SGS
  • DATA section – Contains the following:
    • PACKAGEDATA
    • PERIODS


MF6 ADV Package

The Advection (ADV) Package dialog

The Advection (ADV) Package dialog is accessed by double-clicking on the ADV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • SCHEME


MF6 CNC Package

The Constant Concentration (CNC) Package dialog

The Constant Concentration (CNC) Package dialog is accessed by double-clicking on the CNC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PERIODS – Turn on to make the PERIODS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • AUXILIARY
    • AUXMULTNAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • TS6 FILEIN
    • OBS6 FILEIN
  • PERIODS section – ...
    • Period
    • Define Period
    • Delete Period
    • Add Rows
    • Delete Rows
    • Plot All Periods
    • Open Time Series
    • Filter on Selected Cells
    • LAY
    • ROW
    • COL
    • CONC


MF6 DSP Package

The Dispersion (DSP) Package dialog

The Dispersion (DSP) Package dialog is accessed by double-clicking on the DSP package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • XT3D_OFF
    • XT3D_RHS
  • GRIDDATA section – ...
    • Dataset to Array...
    • Define
    • Layered
    • Constant
    • DIFFC
    • ALH
    • ALV
    • ATH1
    • ATH2
    • ATV


MF6 DISV Package

The Discretization by Vertices (DISV) Package dialog

The Discretization by Vertices (DISV) Package dialog is accessed by double-clicking on the DISV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DIMENSIONS – Turn on to make the DIMENSIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
    • VERTICES – Turn on to make the VERTICES section visible.
    • CELL2D – Turn on to make the CELL2D section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • LENGTH_UNITS
    • NOGRB
    • XORIGIN
    • YORIGIN
    • ANGROT
  • DIMENSIONS section – ...
    • Number of layers (NLAY)
    • Number of cells per layer (NCPL)
    • Number of vertices (NVERT)
  • GRIDDATA section – ...
    • Dataset to Array...
    • Define
    • Layered
    • Constant
    • TOP
    • BOTM
    • IDOMAIN
  • VERTICES section – ...
  • CELL2D section – ...


MF6 DISU Package

The Unstructured Discretization (DISU) Package dialog

The Unstructured Discretization (DISU) Package dialog is accessed by double-clicking on the DISU package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DIMENSIONS – Turn on to make the DIMENSIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
    • CONNECTIONDATA – Turn on to make the CONNECTIONDATA section visible.
    • VERTICES – Turn on to make the VERTICES section visible.
    • CELL2D – Turn on to make the CELL2D section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • LENGTH_UNITS
    • NOGRB
    • XORIGIN
    • YORIGIN
    • ANGROT
  • DIMENSIONS section – ...
    • Number of nodes (NODES)
    • Number of connections and nodes (NJA)
    • Number of vertices (NVERT)
  • GRIDDATA section – ...
    • TOP
    • BOT
    • AREA
    • IDOMAIN
  • CONNECTIONDATA section – ...
    • IAC
    • JA
    • IHC
    • CL12
    • HWVA
    • ANGLDEGX
  • VERTICES section – ...
  • CELL2D section – ...


MF6 FMI Package

The Flow Model Interface (FMI) Package dialog

The Flow Model Interface (FMI) Package dialog is accessed by double-clicking on the FMI package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PACKAGEDATA – Turn on to make the PACKAGEDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_IMBALANCE_CORRECTION
  • PACKAGEDATA section – ...
    • Let GMS determine the paths from the flow simulation when saving
      • Select Flow Simulation...
    • Add Rows...
    • FLOWTYPE
    • FNAME


MF6 GWT Package

The Groundwater Transport (GWT) Model Name File dialog

The Groundwater Transport (GWT) Model Name File dialog is accessed by double-clicking on the GWT model under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PACKAGES – Turn on to make the PACKAGES section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • LIST
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
  • PACKAGES section – ...
    • ftype
    • fname
    • pname


MF6 IST Package

The Immobile Storage and Transfer (IST) Package dialog

The Immobile Storage and Transfer (IST) Package dialog is accessed by double-clicking on the IST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • SAVE_FLOWS
    • SORPTION
    • FIRST_ORDER_DECAY
    • ZERO_ORDER_DECAY
    • CIM FILEOUT
    • CIM PRINT_FORMAT
  • GRIDDATA section – ...
    • CIM
    • THETAIM
    • ZETAIM
    • DECAY
    • DECAY_SORBED
    • BULK_DENSITY
    • DISTCOEF


MF6 LKT Package

The Lake Transport (LKT) Package dialog

The Lake Transport (LKT) Package dialog is accessed by double-clicking on the LKT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


MF6 MST Package

The Mobile Storage and Transfer (MST) Package dialog

The Mobile Storage and Transfer (MST) Package dialog is accessed by double-clicking on the MST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • SAVE_FLOWS
    • FIRST_ORDER_DECAY
    • ZERO_ORDER_DECAY
    • SORPTION
  • GRIDDATA section – ...
    • POROSITY
    • DECAY
    • DECAY_SORBED
    • BULK_DENSITY
    • DISTCOEF
    • SP2


MF6 MVT Package

The Mover Transport (MVT) Package dialog

The Mover Transport (MVT) Package dialog is accessed by double-clicking on the MVT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • BUDGET FILEOUT


MF6 MWT Package

The Multi-Aquifer Well Transport (MWT) Package dialog

The Multi-Aquifer Well Transport (MWT) Package dialog is accessed by double-clicking on the MWT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


MF6 SFT Package

The Streamflow Transport (SFT) Package dialog

The Streamflow Transport (SFT) Package dialog is accessed by double-clicking on the SFT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


MF6 SRC Package

The Mass Source Loading (SRC) Package dialog

The Mass Source Loading (SRC) Package dialog is accessed by double-clicking on the SRC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PERIODS – Turn on to make the PERIODS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • AUXILIARY
    • AUXMULTNAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • TS6 FILEIN
    • OBS6 FILEIN
  • PERIODS section – ...
    • Period
    • Define Period
    • Delete Period
    • Add Rows
    • Delete Rows
    • Plot All Periods
    • Open Time Series
    • Filter on Selected Cells
    • LAY
    • ROW


MF6 SSM Package

The Source and Sink Mixing (SSM) Package dialog

The Source and Sink Mixing (SSM) Package dialog is accessed by double-clicking on the SSM package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • SOURCES – Turn on to make the SOURCES section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • PRINT_FLOWS
    • SAVE_FLOWS
  • SOURCES section – ...
    • Set Up From Flow Model
    • Add Rows...
    • PNAME
    • SRCTYPE


MF6 UZT Package

The Unsaturated Zone Transport (UZT) Package dialog

The Unsaturated Zone Transport (UZT) Package dialog is accessed by double-clicking on the UZT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


Arrays to Datasets

GWF-GWF Exchange

The Groundwater Flow (GWF) Exchange dialog

The Groundwater Flow (GWF) Exchange dialog is accessed by double-clicking on the GWF-GWF package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • EXCHANGEDATA – Turn on to make the EXCHANGEDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • AUXILIARY
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CELL_AVERAGING
    • VARIABLECV
    • NEWTON
    • GNC6 FILEIN
    • MVR6 FILEIN
    • OBS6 FILEIN
  • EXCHANGEDATA section – ...
    • Add Rows...
    • LAYM1
    • ROWM1
    • COLM1
    • LAYM2
    • ROWM2
    • COLM2
    • IHC
    • CL1
    • CL2
    • HWVA


GWF-GWT Exchange

MODFLOW 6 GWF/GWT Display Options

MODFLOW 6 GWF/GWF Display Options