Difference between revisions of "User:Jcreer/SMS:SRH-2D Plots"

From XMS Wiki
Jump to navigationJump to search
Line 1: Line 1:
 
__NOINDEX__
 
__NOINDEX__
 
{{Version SMS 13.2}}
 
{{Version SMS 13.2}}
 
+
[[File:SRH-2D SolutionPlots.png|thumb|450 px|Example of the ''SRH-2D Solution Plots'' dialog]]
 
The command brings up the ''SRH-2D Solution Plots'' dialog. which allows the user to select from a list of solution plots which include:
 
The command brings up the ''SRH-2D Solution Plots'' dialog. which allows the user to select from a list of solution plots which include:
 
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )
 
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )

Revision as of 18:14, 21 August 2020

Example of the SRH-2D Solution Plots dialog

The command brings up the SRH-2D Solution Plots dialog. which allows the user to select from a list of solution plots which include:

  • Monitor point water level -vs- time (1 for each monitor point in the simulation )
  • Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
  • Monitor line flux vs time (1 for each monitor line in the simulation)
  • Net Q -vs- time (percentage of flow entering the simulation that leaves the simulation at a given time)
    • -100% means all the flow that entered the simulation at this time stayed in the simulation
    • 0% means the same amount of flow exited during this time step as entered
    • >0% means more flow left the simulation than entered it.
  • Mass loss -vs- time
  • Average Mass loss -vs- time

The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simutaion.

When a user selects a plot from the list (in a list widget on the left of the dialot), the selected plot appears in a window on the right side of the dialog.