User:Jcreer/SMS:SRH-2D Plots: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
__NOINDEX__
__NOINDEX__
{{Version SMS 13.2}}
{{Version SMS 13.2}}
[[File:SRH-2D SolutionPlots.png|thumb|450 px|Example of the ''SRH-2D Solution Plots'' dialog]]
In the SRH-2D simulation right-click menu, using the ''Tools'' | '''View Simulation Plots''' command brings up the ''SRH-2D Solution Plots'' dialog. This dialog provides a list of solution plots. The list of available plots in on the left side of the dialog. Once a plot is selected from the list, the plot will be shown in the plot window on the right side of the dialog.


The command brings up the "SRH-2D Solution Plots" dialog. which allows the user to select from a list of solution plots which include:
Available plots include:
*     Monitor point water level -vs- time (1 for each monitor point in the simulation )
* ''Net_Q/INLET_Q'' – Net Q -vs- time. Percentage of flow entering the simulation that leaves the simulation at a given time:
*    Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
** -100% means all the flow that entered the simulation at this time stayed in the simulation
*      Monitor line flux vs time (1 for each monitor line in the simulation)
** 0% means the same amount of flow exited during this time step as entered
*      Net Q -vs- time (percentage of flow entering the simulation that leaves the simulation at a given time)
** >0% means more flow left the simulation than entered it.
**               -100% means all the flow that entered the simulation at this time stayed in the simulation
* ''Mass Balance'' – includes mass loss -vs- time and  average mass loss -vs- time
**               0% means the same amount of flow exited during this time step as entered
* ''Monitor Points WSE'' – Monitor point water level -vs- time. Will display one plot for each monitor point in the simulation.
**             >0% means more flow left the simulation than entered it.
* ''Monitor Points Z'' – Monitor point ground level -vs- time. Will display one for each monitor point in the simulation. This plot is not meaningful unless the simulation includes sediment transport.
*     Mass loss -vs- time
* ''Monitor Lines'' – Monitor line flux vs time. Will display one plot for each monitor line in the simulation.
*     Average Mass loss -vs- time


  The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simutaion.
Under the plot list, there is the following option:
 
*''Specify time range'' – allows specifying the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.
  When a user selects a plot from the list (in a list widget on the left of the dialot), the selected plot appears in a window on the right side of the dialog.
**''Minimum time'' – The beginning time range.
**''Maximum time'' – The ending time range.


==Related Topics==
* [[SMS:SRH-2D Menu|SRH-2D Menu]]
* [[SMS:SRH-2D Simulation|SRH-2D Simulation]]





Revision as of 19:31, 21 August 2020

File:SRH-2D SolutionPlots.png
Example of the SRH-2D Solution Plots dialog

In the SRH-2D simulation right-click menu, using the Tools | View Simulation Plots command brings up the SRH-2D Solution Plots dialog. This dialog provides a list of solution plots. The list of available plots in on the left side of the dialog. Once a plot is selected from the list, the plot will be shown in the plot window on the right side of the dialog.

Available plots include:

  • Net_Q/INLET_Q – Net Q -vs- time. Percentage of flow entering the simulation that leaves the simulation at a given time:
    • -100% means all the flow that entered the simulation at this time stayed in the simulation
    • 0% means the same amount of flow exited during this time step as entered
    • >0% means more flow left the simulation than entered it.
  • Mass Balance – includes mass loss -vs- time and average mass loss -vs- time
  • Monitor Points WSE – Monitor point water level -vs- time. Will display one plot for each monitor point in the simulation.
  • Monitor Points Z – Monitor point ground level -vs- time. Will display one for each monitor point in the simulation. This plot is not meaningful unless the simulation includes sediment transport.
  • Monitor Lines – Monitor line flux vs time. Will display one plot for each monitor line in the simulation.

Under the plot list, there is the following option:

  • Specify time range – allows specifying the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.
    • Minimum time – The beginning time range.
    • Maximum time – The ending time range.

Related Topics