Difference between revisions of "User:Jcreer/SMS:SRH-2D Plots"

From XMS Wiki
Jump to navigationJump to search
 
(2 intermediate revisions by the same user not shown)
Line 14: Line 14:
 
* ''Monitor Lines'' – Monitor line flux vs time. Will display one plot for each monitor line in the simulation.
 
* ''Monitor Lines'' – Monitor line flux vs time. Will display one plot for each monitor line in the simulation.
  
The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.
+
Under the plot list, there is the following option:
 
+
*''Specify time range'' – allows specifying the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.
When a user selects a plot from the list (in a list widget on the left of the dialog), the selected plot appears in a window on the right side of the dialog.
+
**''Minimum time'' – The beginning time range.
 +
**''Maximum time'' – The ending time range.
  
 +
==Related Topics==
 +
* [[SMS:SRH-2D Menu|SRH-2D Menu]]
 +
* [[SMS:SRH-2D Simulation|SRH-2D Simulation]]
  
  

Latest revision as of 19:31, 21 August 2020

Example of the SRH-2D Solution Plots dialog

In the SRH-2D simulation right-click menu, using the Tools | View Simulation Plots command brings up the SRH-2D Solution Plots dialog. This dialog provides a list of solution plots. The list of available plots in on the left side of the dialog. Once a plot is selected from the list, the plot will be shown in the plot window on the right side of the dialog.

Available plots include:

  • Net_Q/INLET_Q – Net Q -vs- time. Percentage of flow entering the simulation that leaves the simulation at a given time:
    • -100% means all the flow that entered the simulation at this time stayed in the simulation
    • 0% means the same amount of flow exited during this time step as entered
    • >0% means more flow left the simulation than entered it.
  • Mass Balance – includes mass loss -vs- time and average mass loss -vs- time
  • Monitor Points WSE – Monitor point water level -vs- time. Will display one plot for each monitor point in the simulation.
  • Monitor Points Z – Monitor point ground level -vs- time. Will display one for each monitor point in the simulation. This plot is not meaningful unless the simulation includes sediment transport.
  • Monitor Lines – Monitor line flux vs time. Will display one plot for each monitor line in the simulation.

Under the plot list, there is the following option:

  • Specify time range – allows specifying the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.
    • Minimum time – The beginning time range.
    • Maximum time – The ending time range.

Related Topics