User:Jcreer/SMS:SRH-2D Plots: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 5: Line 5:


Available plots include:
Available plots include:
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )
*    Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
*      Monitor line flux vs time (1 for each monitor line in the simulation)
*  ''Net_Q/INLET_Q'' –    Net Q -vs- time, percentage of flow entering the simulation that leaves the simulation at a given time:
*  ''Net_Q/INLET_Q'' –    Net Q -vs- time, percentage of flow entering the simulation that leaves the simulation at a given time:
**              -100% means all the flow that entered the simulation at this time stayed in the simulation
**              -100% means all the flow that entered the simulation at this time stayed in the simulation
**              0% means the same amount of flow exited during this time step as entered
**              0% means the same amount of flow exited during this time step as entered
**              >0% means more flow left the simulation than entered it.
**              >0% means more flow left the simulation than entered it.
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )
*    Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
*      Monitor line flux vs time (1 for each monitor line in the simulation)
*      Mass loss -vs- time
*      Mass loss -vs- time
*      Average Mass loss -vs- time
*      Average Mass loss -vs- time

Revision as of 18:51, 21 August 2020

File:SRH-2D SolutionPlots.png
Example of the SRH-2D Solution Plots dialog

In the SRH-2D simulation right-click menu, using the Tools | View Simulation Plots command brings up the SRH-2D Solution Plots dialog. This dialog provides a list of solution plots. The list of available plots in on the left side of the dialog. Once a plot is selected from the list, the plot will be shown in the plot window on the right side of the dialog.

Available plots include:

  • Net_Q/INLET_Q – Net Q -vs- time, percentage of flow entering the simulation that leaves the simulation at a given time:
    • -100% means all the flow that entered the simulation at this time stayed in the simulation
    • 0% means the same amount of flow exited during this time step as entered
    • >0% means more flow left the simulation than entered it.
  • Monitor point water level -vs- time (1 for each monitor point in the simulation )
  • Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
  • Monitor line flux vs time (1 for each monitor line in the simulation)
  • Mass loss -vs- time
  • Average Mass loss -vs- time

The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.

When a user selects a plot from the list (in a list widget on the left of the dialog), the selected plot appears in a window on the right side of the dialog.