User:Jcreer/SMS:UGrid Clipping Workflow

From XMS Wiki
< User:Jcreer
Revision as of 21:45, 27 March 2019 by Jcreer (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Gnome globe current event.png
 This contains information about functionality available starting at SMS version 13.1.
The content may not apply to other versions.
Sms icon.png

The UGrid clipping display option can be used to cut away a portion of a UGrid and visualize the data inside the grid. To create a UGrid clipping, follow the steps below using an existing UGrid project.

1. Use a clipping plane.
1. Select a UGrid cell and note vector points.
  1. Use the Select Elements SMS Select Mesh Element Tool.svg tool and note the cell centroid values.
2. Set UGrid clipping display options.
  1. Select the Display | Display Options menu command.
  2. In the UGrid tab for the UGrid that is to be adjusted, turn on the Clip options and click the Options dialog.
    • Adjusting in the general UGrid tab will not have the desired effect.
  3. In the UGrid Clip Settings dialog, select the "Plane" setting and set the plane values.
    • The cell centroid values and normal vector points must be entered.
3. Use the clipping plane widget.
  1. Using the Edit Clip Plane Edit Clip Plane Tool.svg tool, adjust the clipping plane location.
2. Clip to a scalar value.
  1. Select the Display | Display Options menu command.
  2. In the UGrid tab for the UGrid that is to be adjusted, turn on the Clip options and click the Options dialog.
    • Adjusting in the general UGrid tab will not have the desired effect.
  3. In the UGrid Clip Settings dialog, select the "Scalar" setting and set the scalar value.
    • Only values above the selected scalar value will be displayed.
3. Clip to a scalar range.
  1. Select the Display | Display Options menu command.
  2. In the UGrid tab for the UGrid that is to be adjusted, turn on the Clip options and click the Options dialog.
    • Adjusting in the general UGrid tab will not have the desired effect.
  3. In the UGrid Clip Settings dialog, select the "Scalar Range" setting and set the range values.
    • Only values within the selected scalar values will be displayed.


v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=User:Jcreer/SMS:UGrid_Clipping_Workflow&oldid=138906"