WMS:Computing Area Between Elevations: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
(fix)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[File:AreaBetweenElevations.png|thumb|250 px|The ''Area Between Elevations'' dialog]]
[[File:AreaBetweenElevations.png|thumb|250 px|The ''Area Between Elevations'' dialog]]
The '''Compute Area Between Elevations''' command is useful for determining areas in different elevation zones as part of a snow melt analysis.
The '''Compute Area Between Elevations''' command is useful for determining areas in different elevation zones as part of a snow melt analysis.
==TINs and DEMs==
The '''Compute Area Between Elevations''' command is found in the ''TIN'' and ''DEM'' menus in the Drainage module, as well as the TIN and DEM item right-click menus in the Project Explorer. Using the command brings up the ''Area Between Elevations'' dialog. Enter the ''Lower Elevation'' and ''Upper Elevation'' values then press the '''Compute Area''' button to get the area between elevations value. The ''Area'' field shows the solution along with the units being used. This value may be selected and copied if needed.


The '''Compute Area Between Elevations''' command is found in the ''TIN'' and ''DEM'' menus, as well as the TIN and DEM item right-click menus in the Project Explorer. Using the command brings up the ''Area Between Elevations'' dialog. Enter the ''Lower Elevation'' and ''Upper Elevation'' values then press the '''Compute Area''' button to get the area between elevations value. The ''Area'' field shows the solution along with the units being used. This value may be selected and copied if needed.
==HEC-1==
 
This operation can also be done when defining [[WMS:Basin HEC-1 Cards#Elevation Zone Data (MA)|snow melt parameters for HEC-1]]. Model units are assumed to be either in feet or meters and subsequent areas are converted to square miles or square kilometers according to the metric flag set in the [[WMS:HEC-1 Job Control#Units (IM)|''HEC-1 Job Control'']] dialog.
This operation can also be done when defining [[WMS:Basin HEC-1 Cards#Elevation Zone Data (MA)|snow melt parameters for HEC-1]]. Model units are assumed to be either in feet or meters and subsequent areas are converted to square miles or square kilometers according to the metric flag set in the [[WMS:HEC-1 Job Control#Units (IM)|''HEC-1 Job Control'']] dialog.


Line 17: Line 18:
[[Category:TINs|C]]
[[Category:TINs|C]]
[[Category:DEM|C]]
[[Category:DEM|C]]
[[Category:Drainage]]
[[Category:Hydrologic Modeling|C]]
[[Category:Hydrologic Modeling|C]]
[[Category:HEC-1|C]]
[[Category:HEC-1|C]]


{{stub}}
{{stub}}

Latest revision as of 22:59, 22 July 2020

The Area Between Elevations dialog

The Compute Area Between Elevations command is useful for determining areas in different elevation zones as part of a snow melt analysis.

TINs and DEMs

The Compute Area Between Elevations command is found in the TIN and DEM menus in the Drainage module, as well as the TIN and DEM item right-click menus in the Project Explorer. Using the command brings up the Area Between Elevations dialog. Enter the Lower Elevation and Upper Elevation values then press the Compute Area button to get the area between elevations value. The Area field shows the solution along with the units being used. This value may be selected and copied if needed.

HEC-1

This operation can also be done when defining snow melt parameters for HEC-1. Model units are assumed to be either in feet or meters and subsequent areas are converted to square miles or square kilometers according to the metric flag set in the HEC-1 Job Control dialog.

This same procedure is also useful for determining storage capacity curves.


Related Topics: