WMS:Stochastic Simulation Parameters

There are several simulation parameters that control a stochastic simulation. They are defined in the Stochastic Run Parameters dialog shown below. Each section of this dialog is discussed below.

File:Image87.jpg

Simulation Type The simulation type and number of simulations can be set. In a Monte Carlo simulation, each specified input variable is randomly varied within a specified minimum and maximum value a given number of times. If only a few simulations are run it may not be guaranteed to fully explore the parameter space. A Latin Hypercube simulation, on the other hand, divides the range into intervals and insures that parameters are chosen from each interval. With this kind of simulation you are more likely to explore the parameter space with fewer simulations.

Stochastic Models HEC-1 or TR-20 for hydrologic modeling, HEC-RAS for hydraulic modeling, and Floodplain Delineation are the only currently available models for stochastic modeling. For each model you include a basin input file and solution files directory needs to be defined. For HEC-1, TR-20, or HEC-RAS you should select the input file of the already created model. These models will have key values (negative numbers) for the input parameters that will be defined as stochastic variables. The current floodplain delineation options will be saved in the flood run file.

You can add stochastic variables for any of the models. Each stochastic variable requires a key value (a negative number that has been entered in place of a parameter such as precipitation), a type, a starting value, a minimum value, a maximum value, a standard deviation, and a distribution. The distribution can be either normal or uniform and optionally defined as log.

Previous Step in Stochastic Modeling

Next Step in Stochastic Modeling

Related Topics

• Stochastic Modeling
• Hydrologic Modeling
• Hydraulic Modeling
• Floodplain Delineation