HY8:Tailwater Data

From XMS Wiki
Jump to navigationJump to search

Tailwater Data

HY-8 provides the following options for calculating the tailwater rating curve downstream from a culvert crossing:

Uniform depth is used to represent tailwater elevations for both a defined channel shape and an irregular channel. The cross section representing these two options should be located downstream from the culvert where normal flow is assumed to occur (downstream from channel transitions, for example). The calculated water surface elevations are assumed to apply at the culvert outlet.


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Tailwater_Data&oldid=112965"