SMS:BOUSS-2D Menu

The following menu commands are available in the BOUSS-2D Menu:

Command	Functionality
Spectral Energy	Brings up the spectral energy dialog to define/view wave energy spectra. Generally, BOUSS-2D will generate wave conditions internally, but a spectrum may be input. This command also allows the user to visualize wave spectra that are generated inside of the model.
Assign BC	This command is used to assign damping, porosity, or wave maker conditions along a selected cell string(s).
Assign Cell Attributes	Selected cells can be defined as land or water
Probe Manager	Brings up the Probe Manager to control time series output from the model
Calculators	Brings up a pop up menu to access the Wave Conditions Calculator (see appendix A) as well as the Run-up/Overtopping Estimator.
Model Check …	Under development - check for common problems.
Model Control…	Brings up the Model Control dialog to specificy model parameters.
Run BOUSS-2D	Brings up a dialog that allows the user to check what executable of BOUSS-2D should be run and then runs the model with the currently loaded simulation. As the model runs, a dialog monitors progress of the model and gives the user status messages. When the run is complete, the spatial solutions are read in for analysis and visualization.

Template:SMS Menus

SMS

Modules: Mesh Module · Cartesian Grid Module · Scatter Module · Map Module · GIS Module · Particle Module
Models: ADCIRC · BOUSS-2D · CGWAVE · CMS-Flow · CMS-Wave · FESWMS · FVCOM · Generic Mesh Model · GENESIS · HYDRO AS-2D · PTM · SRH-2D · Steering · STWAVE · TABS · TUFLOW