|
|
| Line 1: |
Line 1: |
| The perimeter of the TIN resulting from the [[WMS:Triangulating|triangulation process]] corresponds to or approximates the convex hull of the data points. This may result in some long thin triangles or "slivers" on the perimeter of the triangulated region. There are several ways to deal with the long thin triangles.
| | #REDIRECT [[WMS:Triangulation]] |
| | |
| ==Selecting Boundary Triangles==
| |
| | |
| The thin triangles can be selected and deleted using the [[WMS:Dynamic Tool Palette|normal selection procedures]]. There is also an option for selecting thin triangles when the Select Triangles tool is selected. If the CTRL key is held down, it is possible to drag out a line with the mouse. All triangles intersecting the line will be selected.
| |
| | |
| Another technique can be used to select long thin triangles on the perimeter of the TIN. By selecting the '''Select Boundary Triangles''' command from the '''TIN''' menu, the thin triangles on the perimeter of the TIN are automatically selected.
| |
| | |
| The '''Select Boundary Triangles''' command checks triangles on the outer boundary first. If the length ratio of the triangle is less than the critical length ratio, the triangle is selected and the triangles adjacent to the triangle are then checked. The process continues inward until none of the adjacent triangles violate the minimum length ratio.
| |
| | |
| ===Thin Triangle Aspect Ratio===
| |
| | |
| The critical length ratio for selecting thin triangles can be set by selecting '''Length Ratio''' from the '''TIN''' menu. The length ratio is defined as the longest side of the triangle divided by the sum of the two shorter sides.
| |
| | |
| A maximum edge length may also be specified in the [[WMS:TIN Options|TIN Options]] dialog.
| |
| | |
| ==Related Topics==
| |
| * [[WMS:Triangulating|Triangulating]]
| |
| * [[WMS:Dynamic Tool Palette|Selecting Objects]]
| |
| * [[WMS:Edit Menu#Delete|Delete]]
| |
| * [[WMS:TIN Options|TIN Options]]
| |
| | |
| | |
| {{Template:WMSMain}}
| |
| [[Category:TINs]]
| |
