Template:SMS Interpolate Images Workflow: Difference between revisions

Revision as of 15:26, 23 September 2015

1. Interpolate raster data to active coverage.
Select and make active the map coverage where the raster data is to be interpolated. Right-click on the raster image and select the Interpolate \| Active Coverage command.

2. Interpolate raster data to 2D Mesh.
Select and make active the mesh where the raster data is to be interpolated. Right-click on the raster image and select the Interpolate \| 2D Mesh command.

3. Interpolate raster data to scatter set.
Select and make active the scatter set where the raster data is to be interpolated. Right-click on the raster image and select the Interpolate \| 2D Scatter command.

4. Interpolate image data to 2D grid.
Select and make active the 2D grid where the raster data is to be interpolated. Right-click on the raster image and select the Interpolate To \| 2D Grid command.

@@ Line 13: / Line 13: @@
 |-
 |
-:# Select and make active the mesh where the raster data is to be interpolated.
+:# Select and make active the [[SMS:Mesh Module|mesh]] where the raster data is to be interpolated.
 :# Right-click on the raster image and select the [[SMS:GIS_Module_Menus#GIS_Module_Right-Click_Commands|''Interpolate'' | '''2D Mesh''']] command.
 |}