SMS:BOUSS-2D Menu
The following menu commands are available in the BOUSS-2D Menu:
| Command | Functionality |
|---|---|
| Spectral Energy |
Brings up the spectral energy dialog to define/view wave energy spectra. Generally, BOUSS-2D will generate wave conditions internally, but a spectrum may be input. This command also allows the user to visualize wave spectra that are generated inside of the model. |
| Assign BC |
This command is used to assign damping, porosity, or wave maker conditions along a selected cell string(s). |
| Assign Cell Attributes |
Selected cells can be defined as land or water |
| Probe Manager |
Brings up the Probe Manager to control time series output from the model |
| Calculators |
Brings up a pop up menu to access the Wave Conditions Calculator (see appendix A) as well as the Run-up/Overtopping Estimator. |
| Model Check … |
Under development - check for common problems. |
| Model Control… |
Brings up the Model Control dialog to specificy model parameters. |
| Run BOUSS-2D |
Brings up a dialog that allows the user to check what executable of BOUSS-2D should be run and then runs the model with the currently loaded simulation. As the model runs, a dialog monitors progress of the model and gives the user status messages. When the run is complete, the spatial solutions are read in for analysis and visualization. |
Modules: Mesh Module · Cartesian Grid Module · Scatter Module · Map Module · GIS Module · Particle Module
Models: ADCIRC · BOUSS-2D · CGWAVE · CMS-Flow · CMS-Wave · FESWMS · FVCOM · Generic Mesh Model · GENESIS · HYDRO AS-2D · PTM · SRH-2D · Steering · STWAVE · TABS · TUFLOW
