Search results

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

:[[GMS:Toolbars|Tool Palettes]] ;5.1. TIN Module

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

...module]], [[GMS:3D Grid Tool Palette|3D Grid module]], [[GMS:3D Mesh Tool Palette|3D Mesh module]]). This line is then projected perpendicular to the screen ...h of the designated arcs. As is the case when the '''Make Cross Section''' tool is used, the cross sections are constructed by projecting the arcs parallel

...nerate [[SMS:ADCIRC|ADCIRC]] meshes with automatic density variation. This tool is based on [[SMS:LTEA|Local Truncation Error Analysis]]. # Select the '''Create Nodes''' tool from the Tool Palette.

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

;5.1. TIN Module :[[GMS:TIN Module|TIN Module]]

...g nodes]], [[GMS:3D Mesh Tool Palette|elements]], and [[GMS:3D Mesh Tool Palette|element faces]] and assigning values directly to the selected objects. The ...Solids and 3D Meshes with TINs|'''TINs → 3D Mesh''']] command in the TIN module should be used.

...Mesh nodes. Elements can be created by using one of the [[GMS:3D Mesh Tool Palette|'''Create Element''' tools]] and then selecting the mesh nodes to create el ...are often constructed using a combination of tools in the [[GMS:TIN Module|TIN module]] and the [[GMS:2D Mesh Module|2D Mesh module]]. Portions of the mes

...eans there can be color filled contours for a DEM and linear contours on a TIN at the same time. The set of contour options being edited is determined by ...dialog correspond to the maximum and minimum values in the active dataset (TIN, DEM, etc.). These values are useful when choosing an appropriate contour i

...'' command [[File:Delete Macro Icon.svg|14 px]] is found in the Macro tool palette. ...s all items associated with the current selection tool, providing that the tool supports the '''Select All''' option.

##:*A projection file (.prj) is saved whenever a geometric object (TIN, mesh, borhole etc) is exported to a file. GMS will also look for a corresp ##[[GMS:Toolbars#Static_Tool_Palette|Measure tool]]

:[[WMS:Modules#Module Palette|Module Palette]] :[[WMS:Static Tool Palette|Static Tool Palette]]

:[[WMS:Static Tool Palette|Static Tool Palette]] :[[WMS:Dynamic Tool Palette|Dynamic Tool Palette]]