Template:GMS Interpolate Raster Workflow

From XMS Wiki
Revision as of 20:59, 15 February 2017 by Jcreer (talk | contribs) (Protected "Template:GMS Interpolate Raster Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))

Jump to navigationJump to search
1. Interpolate raster data to active coverage.
  1. Select and make active the map coverage where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | Active Coverage command.
2. Interpolate raster data to TIN.
  1. Select and make active the TIN where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | TIN command.
3. Interpolate raster data to 2D Mesh.
  1. Select and make active the mesh where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Mesh command.
4. Interpolate raster data to a 2D scatter set.
  1. Select and make active the 2D scatter set where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Scatter command.
5. Interpolate raster data to 2D grid.
  1. Select and make active the 2D grid where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate To | 2D Grid command.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:GMS_Interpolate_Raster_Workflow&oldid=119724"