From XMS Wiki
This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search
| Expand2. Interpolate raster data to TIN.
|
- Select and make active the TIN where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate | TIN command.
|
| Expand3. Interpolate raster data to 2D Mesh.
|
- Select and make active the 2D mesh where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate | 2D Mesh command.
|
| Expand4. Interpolate raster data to a 2D scatter set.
|
- Select and make active the 2D scatter set where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate | 2D Scatter command.
|
| Expand5. Interpolate raster data to 2D grid.
|
- Select and make active the 2D grid where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate To | 2D Grid command.
|
| Expand6. Interpolate raster data to 3D Mesh.
|
- Select and make active the 3D mesh where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate | 3D Mesh command.
|
| Expand7. Interpolate raster data to a 3D scatter set.
|
- Select and make active the 3D scatter set where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate | 3D Scatter command.
|
| Expand8. Interpolate raster data to 3D grid.
|
- Select and make active the 3D grid where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate To | 3D Grid command.
|
| Expand9. Interpolate raster data to UGrid.
|
- Select and make active the UGrid where the raster data is to be interpolated.
- Right-click on the raster image and select the Interpolate | UGrid command.
|
