SMS:PTM Files

Input and Output files for PTM.

Input Files

• Required files
  • Program Control File (*.pcf) – run time instruction for the model.
  • Mesh file – bathymetry and boundary information for the model.
    • PTM Version 1.0 supports ADCIRC compatible three-noded triangular finite element mesh files (fort.14 or .grd). SMS contains tools to convert mesh files to this format.
  • Hydrodynamic input file – time varying water surface elevation and depth-averaged velocities.
    • The SMS 9.2 interface to PTM Version 1.0 supports XMDF (*.h5) format hydrodynamic files. SMS contains tools to convert mesh output files to this format.
  • Native sediment file – native sediments over the domain defined by the mesh file.

• Optional files
  • Sediment source file – the sediment sources in the simulation.
  • Trap file – locations where information about the simulation should be extracted.
  • Wave file(s) – time varying information about the wave field
  • Wave breaking file(s) – time varying information about wave breaking
  • PTM Boundary Condition file – describes the wet/dry interface

Output Files

The output files use the name given after the keyword :OUTPUT_PREFIX in the program control file and are appended with the following endings:

• Mapping Output File (*_maps.h5) – behavior of the flow and native sediments over the whole domain incremented by time.
• Parcel Data File (*_particles.h5) – parcel information incremented by time.
• Echo file (*_input.out) – ASCII file echoing the input parameters of the simulation.
• Neighbor file (*.neighbors) – contains mesh connectivity information. Once generated, can be specified as an input file to avoid regenerating for subsequent simulations with a given mesh. If the mesh changes, the neighbor file should be regenerated.
• Trap Count File (*_count.out) – contains the time and ID of particles entering a trap
• Trap Residency File (*_residency.out) – contains the time particles enter and exit a trap and the total time spent in the trap.

Template:PTM

SMS

Modules: Mesh Module · Cartesian Grid Module · Scatter Module · Map Module · GIS Module · Particle Module
Models: ADCIRC · BOUSS-2D · CGWAVE · CMS-Flow · CMS-Wave · FESWMS · FVCOM · Generic Mesh Model · GENESIS · HYDRO AS-2D · PTM · SRH-2D · Steering · STWAVE · TABS · TUFLOW