HY8:Contra Costa Basin: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
===Contra Costa Basin===
===Contra Costa Basin===
The input variables required for this calculation is the following:
The input variables required for this calculation is the following:
* Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert.
* Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert.
* End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth.
* End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth.
* Basin Width — The channel width is recommended for the basin width.
* Basin Width — The channel width is recommended for the basin width.


The following figures show the design of a Contra Costa basin.
The following figures show the design of a Contra Costa basin.
Line 12: Line 10:


Variables from the figure               
Variables from the figure               
* D — Diameter of culvert
* D — Diameter of culvert
* y<sub>0</sub> &mdash; Outlet depth
* y<sub>0</sub> &mdash; Outlet depth

Latest revision as of 14:39, 11 October 2016

Contra Costa Basin

The input variables required for this calculation is the following:

  • Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert.
  • End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth.
  • Basin Width — The channel width is recommended for the basin width.

The following figures show the design of a Contra Costa basin.

HY8image16.jpg

Variables from the figure

  • D — Diameter of culvert
  • y0 — Outlet depth
  • y2 — Approximate maximum water surface depth
  • y3 — Basin exit velocity
  • V0 — Outlet velocity
  • V2 — Exit velocity
  • h1 — Height of small baffle
  • h2 — Height of large baffle
  • h3 — Height of end sill
  • L2 — Length from culvert exit to large baffle
  • L3 — Length from large baffle to end sill
  • LB — Basin length