Template:Steady State vs. Transient Interpolation

From XMS Wiki
(Redirected from GMS:Steady State vs. Transient Interpolation)

This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search

Steady State vs. Transient Interpolation

If the active dataset happens to be a transient dataset, two options are available:

  1. Steady state interpolation can be performed using only the selected time step of the active dataset.
  2. Transient interpolation can be performed using all of the time steps.

By default, only the selected time step is used. The time step is shown next to Time step at the top of the dialog. All of the time steps can be selected by selecting the Use all time steps option next to the Time step box. If all time steps are chosen, GMS begins with the first time step in the list and repeatedly interpolates from the scatter point set to the target object, one time step at a time, for all of the time steps. As a result, a dataset is created on the target object with a set of time steps matching the time steps on the scatter point set.

When performing transient interpolation with the kriging option, special care should be taken with regard to the variogram. Since each time step represents a separate set of data, technically, a separate variogram (or set of variograms) should be created for each time step (GMS stores a separate variogram for each step). This can be accomplished by selecting each time step one at a time using the Time step combo box at the top of the Interpolation Options dialog, and creating a new variogram for each time step.

Related Topics