All public logs

Combined display of all available logs of XMS Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 18:34, 29 October 2024 Cmadsen talk contribs set 163931 as the approved revision for "Template:Bilateral Filter"
• 18:33, 29 October 2024 Cmadsen talk contribs set 163930 as the approved revision for "Template:Breach Depressions"
• 18:33, 29 October 2024 Cmadsen talk contribs set 163926 as the approved revision for "Template:Rho8 Flow Directions"
• 18:33, 29 October 2024 Cmadsen talk contribs set 163925 as the approved revision for "Template:Mean Filter"
• 18:33, 29 October 2024 Cmadsen talk contribs set 163924 as the approved revision for "Template:Gaussian Filter"
• 18:33, 29 October 2024 Cmadsen talk contribs set 163923 as the approved revision for "Template:D8 Flow Directions"
• 18:33, 29 October 2024 Cmadsen talk contribs set 163922 as the approved revision for "Template:Fill Depressions"
• 18:32, 29 October 2024 Cmadsen talk contribs set 163929 as the approved revision for "Template:Watershed Delineation"
• 18:32, 29 October 2024 Cmadsen talk contribs set 163928 as the approved revision for "Template:Subbasins"
• 18:32, 29 October 2024 Cmadsen talk contribs set 163927 as the approved revision for "Template:Strahler Order Basins"
• 22:56, 25 October 2024 Cmadsen talk contribs set 163920 as the approved revision for "Template:Watershed Delineation"
• 22:55, 25 October 2024 Cmadsen talk contribs created page Template:Watershed Delineation (Created page with "__NOINDEX__ __NOTOC__ ==Watershed Delineation== The ''Watershed Delineation'' tool identifies all of the cells upslope of an outlet point that are connected via a flow-path. ===Input Parameters=== *''Input D8 pointer raster file:'' – Select the D8 pointer raster file. *''Input pour points (outlets) coverage:'' – Select the coverage containing the pour points (outlets). *''D8 pointer uses the ESRI style scheme'' – Click here if the D8 pointer raster us...")
• 22:23, 25 October 2024 Cmadsen talk contribs set 163918 as the approved revision for "Template:Subbasins"
• 22:23, 25 October 2024 Cmadsen talk contribs created page Template:Subbasins (Created page with "__NOINDEX__ __NOTOC__ ==Subbasins== The ''Subbasins'' tool identifies the catchment areas for each link in a user-specified stream network. It performs a stream link ID operation followed by a watershed operation. ===Input Parameters=== *''Input D8 pointer raster file:'' – Select the D8 pointer raster to be used. *''Input raster streams file:'' – Select the raster containing the stream network. *''D8 pointer uses the ESRI style scheme'' – Click this...")
• 22:15, 25 October 2024 Cmadsen talk contribs set 163916 as the approved revision for "Template:Strahler Order Basins"
• 20:26, 25 October 2024 Cmadsen talk contribs set 163915 as the approved revision for "Template:Strahler Order Basins"
• 20:26, 25 October 2024 Cmadsen talk contribs set 163914 as the approved revision for "Template:Strahler Order Basins"
• 20:23, 25 October 2024 Cmadsen talk contribs set 163913 as the approved revision for "Template:Strahler Order Basins"
• 20:23, 25 October 2024 Cmadsen talk contribs created page Template:Strahler Order Basins (Created page with "__NOINDEX__ __NOTOC__ ==Strahler Order Basins== ===Input Parameters=== ===Output Parameters=== ===Toolbox Location=== Rasters/Strahler Order Basins ====Related Links==== *[https://www.whiteboxgeo.com/manual/wbt_book/available_tools/hydrological_analysis.html#StrahlerOrderBasins| Strahler Order Basins] Whitebox Documentation")
• 19:19, 25 October 2024 Cmadsen talk contribs set 163911 as the approved revision for "Template:Rho8 Flow Directions"
• 19:19, 25 October 2024 Cmadsen talk contribs created page Template:Rho8 Flow Directions (Created page with "__NOINDEX__ __NOTOC__ ==Rho8 Flow Directions== The ''Rho8 Flow Directions'' tool generates a flow pointer (flow direction) grid using the Rho8 algorithm. It is a single-flow-direction method routing flow entering each grid cell to one downslope neighbor. ===Input Parameters=== *''Input raster DEM file:'' – Select the DEM raster file. *''D8 pointer uses the ESRI style scheme'' – Check here if the file contains D8 ESRI flow direction values. ===Output Parame...")
• 19:06, 25 October 2024 Cmadsen talk contribs set 163908 as the approved revision for "Template:Mean Filter"
• 18:38, 25 October 2024 Cmadsen talk contribs set 163907 as the approved revision for "Template:Mean Filter"
• 18:38, 25 October 2024 Cmadsen talk contribs created page Template:Mean Filter (Created page with "__NOINDEX__ __NOTOC__ ==Mean Filter== ===Input Parameters=== ===Output Parameters=== ===Toolbox Location=== ====Related Links==== *[https://www.whiteboxgeo.com/manual/wbt_book/available_tools/image_processing_tools_filters.html#MeanFilter| Mean Filter]")
• 18:32, 25 October 2024 Cmadsen talk contribs set 163905 as the approved revision for "Template:Gaussian Filter"
• 18:32, 25 October 2024 Cmadsen talk contribs created page Template:Gaussian Filter (Created page with "__NOINDEX__ __NOTOC__ ==Gaussian Filter== The ''Gaussian Filter'' tool is used on raster images to emphasize the longer-range variability in an image, thus smoothing it. It is useful for reducing noise in an image, but it can significantly blur edges that were well-defined in the input image. The filter works with greyscale and red-green-blue (RGB) color images but the RGB images are changed to intensity-hue-saturation and the filter is applied to the intensity channel....")
• 21:23, 24 October 2024 Cmadsen talk contribs set 163879 as the approved revision for "Template:Fill Depressions"
• 21:20, 24 October 2024 Cmadsen talk contribs set 163878 as the approved revision for "Template:Fill Depressions"
• 21:20, 24 October 2024 Cmadsen talk contribs created page Template:Fill Depressions (Created page with "__NOINDEX__ __NOTOC__ ==Fill Depressions== The ''Fill Depressions'' tool is used to fill in all of the depressions in a digital elevation model (DEM) and to remove flat areas. The tool identifies single-cell pits and visits them in highest to lowest until it identifies an outlet flow point, then it back-fills ===Input Parameters=== *''Input raster DEM file:'' – *''Optional flag indicating whether flat areas should have a small gradient applied'' – Default...")
• 21:05, 24 October 2024 Cmadsen talk contribs set 163875 as the approved revision for "Template:D8 Flow Directions"
• 21:05, 24 October 2024 Cmadsen talk contribs created page Template:D8 Flow Directions (Created page with "__NOINDEX__ __NOTOC__ ==D8 Flow Directions== The ''D8 Flow Directions'' tool is used to create a flow pointer grid. This tool is usually used after the ''Breach Depressions'' or the ''Fill Depressions'' tools have been run. The direction raster created by this tool is necessary for other tools. ===Input Parameters=== *''Input raster DEM file:'' – Select the raster DEM file to use. *''D8 pointer uses the ESRI style scheme'' – Check this option if the pointer...")
• 20:52, 24 October 2024 Cmadsen talk contribs created page User:Cmadsen/template creation (Created page with "__NOINDEX__ __NOTOC__ {{D8_Flow_Directions}}")
• 20:46, 24 October 2024 Cmadsen talk contribs set 163871 as the approved revision for "Template:Breach Depressions"
• 20:45, 24 October 2024 Cmadsen talk contribs created page Template:Breach Depressions (Created page with "__NOINDEX__ __NOTOC__ ==Breach Depressions== The ''Breach Depressions'' tool is used to remove depressions in a digital elevation model (DEM) raster file. It uses a breach-first, fill-second approach to resolve continuous flowpaths through depressions. <!-- Whitebox describes this as less satisfactory, higher impact, less efficient, and as a legacy product. They urge users to use the Bread Depressions Least Cost tool instead --> ===Input Parameters=== *''Input raster D...")
• 20:23, 24 October 2024 Cmadsen talk contribs set 163869 as the approved revision for "Template:Bilateral Filter"
• 20:23, 24 October 2024 Cmadsen talk contribs created page Template:Bilateral Filter (Created page with "__NOINDEX__ __NOTOC__ ==Bilateral Filter== The ''Bilateral Filter'' performs an edge-preserving smoothing filter. It can emphasize the longer-range variability in an image, which smooths the image, while reducing the edge blurring effect other smoothing filters might cause. It is very useful for reducing noise in an image. ===Input Parameters=== *''Input raster file:'' – Select the raster to be used. *''Standard deviation in distance in pixels:'' – The clos...")
• 19:51, 24 October 2024 Cmadsen talk contribs set 163866 as the approved revision for "Template:Contours from Single Raster Value"
• 19:42, 24 October 2024 Cmadsen talk contribs set 163865 as the approved revision for "Template:Centroids from Polygons Tool"
• 19:42, 24 October 2024 Cmadsen talk contribs set 163864 as the approved revision for "Template:Clip Tool"
• 19:41, 24 October 2024 Cmadsen talk contribs set 163863 as the approved revision for "Template:Centroids from Polygons Tool"
• 19:40, 24 October 2024 Cmadsen talk contribs set 163862 as the approved revision for "Template:Clip Tool"
• 19:36, 24 October 2024 Cmadsen talk contribs set 163861 as the approved revision for "Template:Clip Tool"
• 19:36, 24 October 2024 Cmadsen talk contribs created page Template:Clip Tool (Created page with "__NOINDEX__ __NOTOC__ ==Clip== The Clip tool is uses boundary polygon(s) to limit the number of arcs, nodes, and points in a coverage to those within the bounds of the polygon. ===Input Parameters=== *''Input vector file:'' – Vector file, usually a coverage, containing the arcs, nodes, and points needing to be limited. *''Input clip polygon vector file:'' – The coverage containing the polygons to limit by. ===Output Parameters=== *''Output vector file:''...")
• 19:27, 24 October 2024 Cmadsen talk contribs set 163859 as the approved revision for "Clip Tool"
• 19:26, 24 October 2024 Cmadsen talk contribs created page Clip Tool (Created page with "__NOINDEX__ {{Clip_Tool}} {{WMSMain}} Toolbox Coverages")
• 19:23, 24 October 2024 Cmadsen talk contribs set 163856 as the approved revision for "Template:Centroids from Polygons Tool"
• 19:22, 24 October 2024 Cmadsen talk contribs set 163855 as the approved revision for "Template:Centroids from Polygons Tool"
• 19:03, 24 October 2024 Cmadsen talk contribs set 163850 as the approved revision for "Template:Centroids from Polygons Tool"
• 19:03, 24 October 2024 Cmadsen talk contribs created page Template:Centroids from Polygons Tool (Created page with "__NOINDEX__ __NOTOC__ ==Centroids from Polygons== ===Input Parameters=== *''Input vector file:'' – A vector file, usually a coverage, to identify the centroid points of a polyline or polygon, or of a group of vector points ===Output Parameters=== *''Output vector file:'' – Creates a vector shapefile of points. Enter the name of the new file created. ===Toolbox Location=== Coverages/Centroids from Polygons ====Related Links==== *[https://www.whiteboxgeo.c...")
• 18:53, 24 October 2024 Cmadsen talk contribs set 163845 as the approved revision for "Centroids from Polygons Tool"