From XMS Wiki
This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search
| 1. Create the 3D UGrid.
|
- Create a 3D UGrid in one of the following ways:
| 1. Create a 3D UGrid from scratch.
|
- Right-click in the Project Explorer and select New | UGrid 3D....
- In the New UGrid dialog, enter the information for the X-, Y-, and Z-Dimension of the grid.
|
| 2. Create a 3D UGrid from a coverage.
|
- Right-click on the desired coverage and select the Map To | UGrid command.
- In the Map → UGrid dialog, set the Dimension drop-down to "3D".
- Enter the rest of the information for the grid, including the X-, Y-, and Z-Dimension information.
|
|
| 2. Create the 2D UGrid.
|
- The 2D UGrid should be created from the 3D UGrid so the grids match.
- In the Project Explorer, right-click on the 3D UGrid and select 3D → 2D.
- Use the 2D UGrid from 3D UGrid tool to generate the 2D UGrid.
|
