SMS:CMS-Wave Monitoring Station Output File: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| (10 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
CMS-Wave can include monitoring stations that will extract the calculated data values including the wave height, period and direction. The extracted values are stored in the CMS-Wave monitoring station output file (selhts.out). This file will only be created if a monitoring station data is specified in the [[SMS:CMS-Wave Control File|control file]]. In SMS, monitoring stations are created as a [[SMS:CMS-Wave Cell Attributes Dialog|cell attribute]] in the Cartesian grid. | CMS-Wave can include monitoring stations that will extract the calculated data values, including the wave height, period and direction. The extracted values are stored in the CMS-Wave monitoring station output file (selhts.out) generated during the model run. This file will only be created if a monitoring station data is specified in the [[SMS:CMS-Wave Control File|control file]]. In SMS, monitoring stations are created as a [[SMS:CMS-Wave Cell Attributes Dialog|cell attribute]] in the Cartesian grid. | ||
== File | == File Format == | ||
The selhts.out uses a fifteen column format | The selhts.out file uses a fifteen column format with values described in the table below: | ||
{| style="border-spacing: 2px; border: 1px solid gray;" | :{| style="border-spacing: 2px; border: 1px solid gray;" | ||
|- | |- | ||
!width="50"|Column Number | !width="50"|Column Number | ||
| Line 15: | Line 15: | ||
|align="right"|3 || || J index in Cartesian (i,j) or 0 (dummy) in quadtree mesh | |align="right"|3 || || J index in Cartesian (i,j) or 0 (dummy) in quadtree mesh | ||
|- | |- | ||
|align="right"|4 || || Significant wave height ( | |align="right"|4 || || Significant wave height (meters) | ||
|- | |- | ||
|align="right"|5 || || Spectral peak wave period ( | |align="right"|5 || || Spectral peak wave period (seconds) | ||
|- | |- | ||
|align="right"|6 || || Mean wave direction ( | |align="right"|6 || || Mean wave direction (degrees, local coordinate system) | ||
|- | |- | ||
|align="right"|7 || || Swell height ( | |align="right"|7 || || Swell height (meters) | ||
|- | |- | ||
|align="right"|8 || || Swell wave period ( | |align="right"|8 || || Swell wave period (seconds) | ||
|- | |- | ||
|align="right"|9 || || Swell direction ( | |align="right"|9 || || Swell direction (degrees) | ||
|- | |- | ||
|align="right"|10 || || Local-generated wave height ( | |align="right"|10 || || Local-generated wave height (meters) | ||
|- | |- | ||
|align="right"|11 || || Local-generated wave period ( | |align="right"|11 || || Local-generated wave period (seconds) | ||
|- | |- | ||
|align="right"| 12 || || local-generated wave direction ( | |align="right"| 12 || || local-generated wave direction (degrees) | ||
|- | |- | ||
|align="right"| 13 || || Wave breaking index (non-zero for breaking) | |align="right"| 13 || || Wave breaking index (non-zero for breaking) | ||
|- | |- | ||
|align="right"|14 || || Max water elevation mark ( | |align="right"|14 || || Max water elevation mark (meters), include wave run-up if calculated | ||
|- | |- | ||
|align="right"|15 || || Flow discharge rate (m*m/sec) at structure cells if calculated | |align="right"|15 || || Flow discharge rate (m*m/sec) at structure cells if calculated | ||
| Line 58: | Line 58: | ||
{{Navbox SMS}} | {{Navbox SMS}} | ||
[[Category:CMS-Wave]] | [[Category:CMS-Wave|Monit]] | ||
[[Category:SMS File Formats|C]] | |||
[[Category:Exporting Data|cms-wave]] | |||
Latest revision as of 15:47, 29 November 2017
CMS-Wave can include monitoring stations that will extract the calculated data values, including the wave height, period and direction. The extracted values are stored in the CMS-Wave monitoring station output file (selhts.out) generated during the model run. This file will only be created if a monitoring station data is specified in the control file. In SMS, monitoring stations are created as a cell attribute in the Cartesian grid.
File Format
The selhts.out file uses a fifteen column format with values described in the table below:
Column Number Value 1 Spectrum label (or time stamp) 2 I index in Cartesian (i,j) or ij index in quadtree mesh 3 J index in Cartesian (i,j) or 0 (dummy) in quadtree mesh 4 Significant wave height (meters) 5 Spectral peak wave period (seconds) 6 Mean wave direction (degrees, local coordinate system) 7 Swell height (meters) 8 Swell wave period (seconds) 9 Swell direction (degrees) 10 Local-generated wave height (meters) 11 Local-generated wave period (seconds) 12 local-generated wave direction (degrees) 13 Wave breaking index (non-zero for breaking) 14 Max water elevation mark (meters), include wave run-up if calculated 15 Flow discharge rate (m*m/sec) at structure cells if calculated
Example
Below is an example of the selhts.out text file.
1 50 70 1.036 20.00 23.2 0.00 0.00 0.0 0.00 0.00 0.0 0 0.518 0.00
1 92 66 0.763 20.00 -13.9 0.00 0.00 0.0 0.00 0.00 0.0 0 0.382 0.00
1 110 60 0.169 20.00 -8.2 0.00 0.00 0.0 0.00 0.00 0.0 0 0.085 0.00
2 50 70 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
2 92 66 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
2 110 60 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
3 50 70 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
3 92 66 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
3 110 60 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
Related Topics
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
