SMS:Breaklines Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
m (Protected "SMS:Breaklines Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
No edit summary
 
Line 1: Line 1:
To create [[SMS:Breaklines|breaklines]], use the following steps:
To create [[SMS:Breaklines|breaklines]] in a scatter set or mesh, use the following steps:


{{SMS Breaklines Workflow}}
{{SMS Breaklines Workflow}}

Latest revision as of 20:30, 6 November 2019

To create breaklines in a scatter set or mesh, use the following steps:

1. Create nodestrings/breaklines.
  1. Select the Create Breakline SMS Create Nodestring Tool.svg tool.
  2. Click along points of a common elevation, such as at a bank toe or levee crest, to connect these points in the surface.
  3. Use the Backspace key to back up if an erroneous selection is made.
  4. Double-click or press Enter key to complete the breakline.
2. Import breaklines.
  1. Breaklines can be imported as a scatter set using the File Import Wizard.
3. Force breaklines in a mesh.
  1. Use the Force Breaklines command in the Nodestrings menu.
  2. Set breakline options in the Nodestring Options dialog.
4. Force breaklines in a scatter set.
  1. Use the Force Breaklines command in the Breaklines menu.
  2. Set breakline options in the Scatter Breakline Options dialog.


v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:Breaklines_Workflow&oldid=143079"