GMS:HydroGeoSphere Arc Properties: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
(Undo revision 162877 by Tgibbs (talk))
Tag: Undo
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{TOC bottom}}
{{TOC bottom}}
{{HGS Links}}
{{HGS Links}}
The ''Arc Properties'' dialog is where the parameters for an arc in a boundary conditions or hydrograph coverage are defined in a HydroGeoSphere model. Only one type of boundary condition can be assigned to a feature object on a boundary conditions coverage. For hydrograph coverages, "Hydrograph" is the only option available to assign to a feature object.
The ''Arc Properties'' dialog is where the parameters for an arc in a [[GMS:HydroGeoSphere Coverages|boundary conditions coverage]] or [[GMS:HydroGeoSphere Coverages|hydrograph coverage]] are defined in a HydroGeoSphere model. Only one type of boundary condition can be assigned to a feature object on a boundary conditions coverage. For hydrograph coverages, "Hydrograph" is the only option available to assign to a feature object.
 
Arcs must be located coincident with UGrid points and vertical faces in XY. Arcs are mapped to different UGrid components based on the boundary conditions type:
* Head – node
* Flux – face
* Simple river – node
* Simple drain – node
* Critical depth – segment
[[File:HGS arc prop.png|thumb|450 px|''Arc Properties'' dialog for the boundary conditions coverage]]
[[File:HGS arc prop.png|thumb|450 px|''Arc Properties'' dialog for the boundary conditions coverage]]


==Head or Flux, Boundary Conditions Coverage==
==Head or Flux==
Head and flux are two separate available arc property types on a boundary conditions coverage, but the input options available are the same. Head is a general specified head boundary condition, and flux is a general specified flux boundary condition. The input options for head and flux are listed below.
Head and flux are two separate available arc property types on a boundary conditions coverage, but the input options available are the same. Head is a general specified head boundary condition, and flux is a general specified flux boundary condition. The input options for head and flux are listed below.
* ''Name'' – Enter a name for the arc.
* ''Name'' – Enter a name for the arc.
* ''Domain'' – The domain in which the boundary condition is applied.
* ''Domain'' – The domain in which the boundary condition is applied.
**"Porous media" – Set properties for porous media.
**"Porous media" – Set properties for porous media.
*** ''Minimum sheet'' – Boundary conditions will be applied between the minimum and maximum node sheets.
*** ''Vertical range'' – Vertical range for porous media.
*** ''Maximum sheet'' – Boundary conditions will be applied between the minimum and maximum node sheets.
****"Max/min node sheets" – Boundary conditions will be applied between the minimum and maximum node sheets.
***** ''Maximum sheet'' – Value for the maximum node sheets.
***** ''Minimum sheet'' – Value for the minimum node sheets.
****"Top/bottom elevations" – Boundary conditions will be applied between the top and bottom elevations.
*****''Top elevation'' – Value for the top elevation.
*****''Bottom elevation'' –  Value for the bottom elevation.
*** ''Input type'' – How the boundary condition data is specified.
*** ''Input type'' – How the boundary condition data is specified.
**** "Constant"
**** "Constant"
Line 20: Line 32:
***** ''Interpolate'' – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
***** ''Interpolate'' – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
***** ''Map to grid boundary'' – Map boundary condition to the boundary of the grid (not the interior).
***** ''Map to grid boundary'' – Map boundary condition to the boundary of the grid (not the interior).
**** Note – If different values are specified for the start and end, then the values are interpolated to the points in the middle of the arc using linear interpolation.
**"Surface flow" – Set properties for surface flow.
**"Surface flow" – Set properties for surface flow.
*** ''Input type'' – How the boundary condition data is specified.
*** ''Input type'' – How the boundary condition data is specified.
Line 31: Line 44:
***** ''Interpolate'' – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
***** ''Interpolate'' – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
***** ''Map to grid boundary'' – Map boundary condition to the boundary of the grid (not the interior).
***** ''Map to grid boundary'' – Map boundary condition to the boundary of the grid (not the interior).
**** Note – If different values are specified for the start and end, then the values are interpolated to the points in the middle of the arc using linear interpolation.


==Simple River or Simple Drain, Boundary Conditions Coverage==
==Simple River or Simple Drain==
Simple river and simple drain are two separate available arc property types on a boundary conditions coverage, but the input options available are the same. Simple river is a river flux drainage boundary condition, and simple drain is a drain flux drainage boundary condition. The input options for simple river and simple drain are listed below.
Simple river and simple drain are two separate available arc property types on a boundary conditions coverage, but the input options available are the same. Simple river is a river flux drainage boundary condition, and simple drain is a drain flux drainage boundary condition. The input options for simple river and simple drain are listed below.
* ''Name'' – Enter a name for the arc.
* ''Name'' – Enter a name for the arc.
Line 46: Line 60:
*** ''Map to grid boundary'' – Map boundary condition to the boundary of the grid (not the interior).
*** ''Map to grid boundary'' – Map boundary condition to the boundary of the grid (not the interior).


==Critical Depth, Boundary Conditions Coverage==
==Critical Depth==
The critical depth boundary condition determines the rate at which mass is leaving the model domain.
The critical depth boundary condition determines the rate at which mass is leaving the model domain.
* ''Name''
* ''Name'' – A descriptive name for the boundary condition, which can be up to 80 characters.
* ''Transient'' – Define a time value table to turn the boundary condition on and off. Values of -99999 indicate that the BC is turned off.
<!--* ''Transient'' &ndash; Define a time value table to turn the boundary condition on and off. Values of -99999 indicate that the BC is turned off.
** ''Time series'' &ndash; Time value table. Values of -99999 indicate that the BC is turned off.
** ''Time series'' &ndash; Time value table. Values of -99999 indicate that the BC is turned off.-->
* ''Map to grid boundary'' &ndash; Map boundary condition to the boundary of the grid (not the interior).
* ''Map to grid boundary'' &ndash; Map boundary condition to the boundary of the grid (not the interior).
[[File:HGS arc prop hydrograph.png|thumb|300px|''Arc Properties'' dialog for the Hydrograph coverage]]
[[File:HGS arc prop hydrograph.png|thumb|300px|''Arc Properties'' dialog for the Hydrograph coverage]]


==Hydrograph, Hydrograph Coverage==
==Hydrograph==
Assigning "hydrograph" to an arc on a hydrograph coverage in a HydroGeoSphere model allows GMS to record hydrograph data during the model run. This requires that "Hydrograph" is set as the parameter for an arc HydroGeoSphere hydrograph coverage, which is done inside the ''Arc Properties'' dialog. The coverage then needs to be added to the simulation. Upon the simulation run, GMS will output detailed flow rate information at each time step for each arc that has been assigned a hydrograph.
Assigning "hydrograph" to an arc causes HydroGeoSphere to record hydrograph data during the model run. The coverage then needs to be added to the simulation. Upon the completing the simulation run, HGS will output detailed flow rate information at each time step for each arc that has been assigned a hydrograph.
* ''Name'' &ndash; A descriptive name for the hydrograph, which can be up to 80 characters.
* ''Name'' &ndash; A descriptive name for the hydrograph, which can be up to 80 characters.
* ''Map to grid boundary'' &ndash; Map grid to the boundary of the grid, not the interior.
* ''Map to grid boundary'' &ndash; Map grid to the boundary of the grid, not the interior.

Latest revision as of 22:24, 7 July 2024


HydroGeoSphere
Models & Tools
HGS Simulation Control
HGS Materials
HGS Coverages
HGS Arc Properties
HGS Point Properties
HGS Polygon Properties
HGS Renumber UGrid
v • e

The Arc Properties dialog is where the parameters for an arc in a boundary conditions coverage or hydrograph coverage are defined in a HydroGeoSphere model. Only one type of boundary condition can be assigned to a feature object on a boundary conditions coverage. For hydrograph coverages, "Hydrograph" is the only option available to assign to a feature object.

Arcs must be located coincident with UGrid points and vertical faces in XY. Arcs are mapped to different UGrid components based on the boundary conditions type:

  • Head – node
  • Flux – face
  • Simple river – node
  • Simple drain – node
  • Critical depth – segment
Arc Properties dialog for the boundary conditions coverage

Head or Flux

Head and flux are two separate available arc property types on a boundary conditions coverage, but the input options available are the same. Head is a general specified head boundary condition, and flux is a general specified flux boundary condition. The input options for head and flux are listed below.

  • Name – Enter a name for the arc.
  • Domain – The domain in which the boundary condition is applied.
    • "Porous media" – Set properties for porous media.
      • Vertical range – Vertical range for porous media.
        • "Max/min node sheets" – Boundary conditions will be applied between the minimum and maximum node sheets.
          • Maximum sheet – Value for the maximum node sheets.
          • Minimum sheet – Value for the minimum node sheets.
        • "Top/bottom elevations" – Boundary conditions will be applied between the top and bottom elevations.
          • Top elevation – Value for the top elevation.
          • Bottom elevation – Value for the bottom elevation.
      • Input type – How the boundary condition data is specified.
        • "Constant"
          • Constant (start) – Constant value of the boundary condition at the start of the arc.
          • Constant (end) – Constant value of the boundary condition at the end of the arc.
        • "Time series"
          • Time series (start) – Time-varying values of the boundary condition at the start of the arc.
          • Time series (end) – Time-varying values of the boundary condition at the end of the arc.
          • Interpolate – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
          • Map to grid boundary – Map boundary condition to the boundary of the grid (not the interior).
        • Note – If different values are specified for the start and end, then the values are interpolated to the points in the middle of the arc using linear interpolation.
    • "Surface flow" – Set properties for surface flow.
      • Input type – How the boundary condition data is specified.
        • "Constant"
          • Constant (start) – Constant value of the boundary condition at the start of the arc.
          • Constant (end) – Constant value of the boundary condition at the end of the arc.
          • Map to grid boundary – Map boundary condition to the boundary of the grid (not the interior).
        • "Time series"
          • Time series (start) – Time-varying values of the boundary condition at the start of the arc.
          • Time series (end) – Time-varying values of the boundary condition at the end of the arc.
          • Interpolate – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
          • Map to grid boundary – Map boundary condition to the boundary of the grid (not the interior).
        • Note – If different values are specified for the start and end, then the values are interpolated to the points in the middle of the arc using linear interpolation.

Simple River or Simple Drain

Simple river and simple drain are two separate available arc property types on a boundary conditions coverage, but the input options available are the same. Simple river is a river flux drainage boundary condition, and simple drain is a drain flux drainage boundary condition. The input options for simple river and simple drain are listed below.

  • Name – Enter a name for the arc.
  • Input type – How the boundary condition data is specified.
    • "Constant"
      • Constant (start) – Constant value of the boundary condition at the start of the arc.
      • Constant (end) – Constant value of the boundary condition at the end of the arc.
      • Map to grid boundary – Map boundary condition to the boundary of the grid (not the interior).
    • "Time series"
      • Time series (start) – Time-varying values of the boundary condition at the start of the arc.
      • Time series (end) – Time-varying values of the boundary condition at the end of the arc.
      • Interpolate – Causes time-varying values to be interpolated, resulting in a smoother application of the time-varying function.
      • Map to grid boundary – Map boundary condition to the boundary of the grid (not the interior).

Critical Depth

The critical depth boundary condition determines the rate at which mass is leaving the model domain.

  • Name – A descriptive name for the boundary condition, which can be up to 80 characters.
  • Map to grid boundary – Map boundary condition to the boundary of the grid (not the interior).
Arc Properties dialog for the Hydrograph coverage

Hydrograph

Assigning "hydrograph" to an arc causes HydroGeoSphere to record hydrograph data during the model run. The coverage then needs to be added to the simulation. Upon the completing the simulation run, HGS will output detailed flow rate information at each time step for each arc that has been assigned a hydrograph.

  • Name – A descriptive name for the hydrograph, which can be up to 80 characters.
  • Map to grid boundary – Map grid to the boundary of the grid, not the interior.

Related Topics


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:HydroGeoSphere_Arc_Properties&oldid=162878"