SMS:Raster Functionalities

Raster Pages
Raster Module Raster Functionalities
Raster Interface Raster Module Interface
Aquaveo

Profile Plot

SMS can generate many different types of 2D plots. Scalar data contained in visible rasters may be plotted using a specific type of 2D plot called a profile plot. When creating a profile plot for a raster using the Plot Wizard and 'specified data' is selected in Step 2, be sure to set the appropriate "Raster Set". Data will be plotted from the rasters in the selected raster set.

Interpolation

Values contained in rasters can be interpolated to existing scattersets, 2D meshes, and 2D grids. To interpolate the values from a raster, right click on the raster set in the project explorer and choose 'Interpolate'. Then choose the appropriate option for which object you wish to interpolate to.

Convert to Scatter

Values from rasters can also be converted into scatter data. This is done by right clicking on the raster item in the Project Explorer and selecting Convert | Raster→2D Scatter.

In special cases, one would want to convert only a selected portion of the raster to scatter data. For more information, see Raster Tools.

Raster Values as Elevation / Z Data

By default data associated with the raster is stored as elevation/z data. If a rasters projection is changed and the units change from meters to feet, the z values also would change. This becomes problematic if the raster values is used to represent NCLD land data and not elevation data. To keep NCLD land data from being projected, you can specify this in the raster set. This is done by right clicking on the raster set and selecting "Options..". A dialog appears allowing you to specify if the values are elevations or not elevations. If raster values are set as not elevations, when doing a projection the z values will remain unchanged.

Related Topics

• Plot Window