SMS:Breaklines Workflow: Difference between revisions

Revision as of 18:54, 11 August 2015

To create breaklines, use the following steps:

1. Create a scatter set or mesh where breaklines can be added.
Breaklines can only be added to an existing scatter set or mesh. Generate a scatter set or mesh.

2. Import breaklines.
Breaklines can be imported as a scatter set using the File Import Wizard.

3. Force breaklines in a mesh.
Use the Force Breaklines command in the Nodestrings menu. Set breakline options in the Nodestring Options dialog.

4. Force breaklines in a scatter set.
Use the Force Breaklines command in the Breaklines menu. Set breakline options in the Scatter Breakline Options dialog.

5. Continue with the project.
After creating breaklines, continue the project using the desired model workflow.

@@ Line 6: / Line 6: @@
 |width="800"|
 :Breaklines can only be added to an existing [[SMS:Scatter Module|scatter]] set or [[SMS:Mesh Module|mesh]].
-:#Generate a scatter set or [[SMS:Mesh Generation|mesh]].
+:#Generate a [[SMS:Scatter Module|scatter set]] or [[SMS:Mesh Generation|mesh]].
 |}
 {|class="wikitable collapsible collapsed"

v • e SMS – Surface-water Modeling System
Modules:	1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid
General Models:	3D Structure • FVCOM • Generic • PTM
Coastal Models:	ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM
Riverine/Estuarine Models:	AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV
Aquaveo • SMS Tutorials • SMS Workflows