SMS:PTM Files

Input and Output files for PTM.

Input Files

• Required files

• Program Control File (*.pcf) – Run time instruction for the model.
• Mesh file – Bathymetry and boundary information for the model.

• PTM Version 1.0 supports ADCIRC compatible three-noded triangular finite element mesh files (fort.14 or .grd). SMS contains tools to convert mesh files to this format.

Hydrodynamic input file – Time varying water surface elevation and depth-averaged velocities.

• The SMS 9.2 interface to PTM Version 1.0 supports XMDF (*.h5) format hydrodynamic files. SMS contains tools to convert mesh output files to this format.

• Native sediment file – Native sediments over the domain defined by the mesh file.

• Optional files

• Sediment source file – The sediment sources in the simulation.
• Trap file – Locations where information about the simulation should be extracted.
• Wave file(s) – Time varying information about the wave field.
• Wave breaking file(s) – Time varying information about wave breaking.
• PTM Boundary Condition file – Describes the wet/dry interface.

Output Files

The output files use the name given after the keyword :OUTPUT_PREFIX in the program control file and are appended with the following endings:

• Mapping Output File (*_maps.h5) – behavior of the flow and native sediments over the whole domain incremented by time.
• Parcel Data File (*_particles.h5) – parcel information incremented by time.
• Echo file (*_input.out) – ASCII file echoing the input parameters of the simulation.
• Neighbor file (*.neighbors) – contains mesh connectivity information. Once generated, can be specified as an input file to avoid regenerating for subsequent simulations with a given mesh. If the mesh changes, the neighbor file should be regenerated.
• Trap Count File (*_count.out) – contains the time and ID of particles entering a trap
• Trap Residency File (*_residency.out) – contains the time particles enter and exit a trap and the total time spent in the trap.

Related Topics

• PTM