User:Jcreer/SMS:FLO-2D: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
__NOINDEX__
{{Future feature}}
FLO-2D is a 2D hydrological-hydraulic dynamic flood model that simulates channel flow, unconfined overland flow, and street flow over complex topography. FLO-2D can simulate Newtonian and no-Newtonian flows over complex topography and roughness.
FLO-2D is a 2D hydrological-hydraulic dynamic flood model that simulates channel flow, unconfined overland flow, and street flow over complex topography. FLO-2D can simulate Newtonian and no-Newtonian flows over complex topography and roughness.


Line 4: Line 6:


==FLO-2D Simulation==
==FLO-2D Simulation==
Starting in SMS 12.2, FLO-2D uses a [[SMS:Simulations|simulation]] process. SMS can run multiple FLO-2D simulations using the same components. To create a new simulation, right-click in the Project Explorer and select ''New Simulation'' | '''FLO-2D'''. Components can then be linked to simulations by dragging the components under the simulation or by right-clicking on the component item and using the ''Link To'' submenu.
Starting in SMS 13.2, FLO-2D uses a [[SMS:Simulations|simulation]] process. SMS can run multiple FLO-2D simulations using the same components. To create a new simulation, right-click in the Project Explorer and select ''New Simulation'' | '''FLO-2D'''. Components can then be linked to simulations by dragging the components under the simulation or by right-clicking on the component item and using the ''Link To'' submenu.


Components for the FLO-2D simulation include the following:
Components for the FLO-2D simulation include the following:
Line 13: Line 15:
* '''Model Check''' – Launches the model checker to look for problems with the simulation setup.
* '''Model Check''' – Launches the model checker to look for problems with the simulation setup.
* '''Export FLO-2D''' – Exports the *.boundary and *.grid files containing the grid and boundary information that will be converted during the simulation run.
* '''Export FLO-2D''' – Exports the *.boundary and *.grid files containing the grid and boundary information that will be converted during the simulation run.
* '''Launch FLO-2D''' – Brings up the FLO-2D model wrapper and starts the simulation run. At the end of the simulation run, FLO-2D will have created a number of output files for use in the FLO-2D program.
* '''Launch FLO-2D''' – Brings up the FLO-2D model wrapper and starts the simulation run. At the end of the simulation run, FLO-2D will have created a basic input data files for use in the FLO-2D program.
* '''Save, Export, and Launch FLO-2D''' – Completes the processes of saving the SMS project, exporting the FLO-2D files, and launching the FLO-2D simulation run.
* '''Save, Export, and Launch FLO-2D''' – Completes the processes of saving the SMS project, exporting the FLO-2D files, and launching the FLO-2D simulation run.


==FLO-2D Files==
==FLO-2D Files==
A FLO-2D simulation in SMS can generate a number of files for use in the FLO-2D program. The following files are generated:
A FLO-2D simulation in SMS can generate a number of files for use in the FLO-2D program. The following files are generated:
* *.boundary – Contains the mesh data generated in SMS. This file is used to generate the other files and must be created before running the HEC-RAC simulation.
* *.boundary – Contains the boundary data generated in SMS. This file is used to generate the other files and must be created before running the FLO-2D simulation.
* *.grid – HEC-RAS geometry file.
* *.grid – Contains the 2D grid data generated in SMS. This file is used to generate the other files and must be created before running the FLO-2D simulation.
* CADPTS.DAT
* CADPTS.DAT – Basic input file for FLO-2D. Topographic file containing floodplain grid point data.
* CONT.DAT
* CONT.DAT – Basic input file for FLO-2D. Contains system control data for the FLO-2D project.
* FPLAIN.DAT
* FPLAIN.DAT – Basic input file for FLO-2D. Topographic file containing floodplain grid element data.
* TOLER.DAT
* TOLER.DAT – Basic input file for FLO-2D. Contains numerical stability control data.
 
==Related Topics==
* [[SMS:SMS Models|SMS Models]]


==External Links==
==External Links==
Line 32: Line 37:
[[Category:FLO-2D]]
[[Category:FLO-2D]]
[[Category:External Links]]
[[Category:External Links]]
[[Category:Jcreer|FLO-2D]]

Latest revision as of 18:28, 15 June 2020

Gnome globe current event.png
 This contains information about future features.
Nuvola apps kpager.png

FLO-2D is a 2D hydrological-hydraulic dynamic flood model that simulates channel flow, unconfined overland flow, and street flow over complex topography. FLO-2D can simulate Newtonian and no-Newtonian flows over complex topography and roughness.

SMS can be used to generated geometry for using with the FLO-2D software.

FLO-2D Simulation

Starting in SMS 13.2, FLO-2D uses a simulation process. SMS can run multiple FLO-2D simulations using the same components. To create a new simulation, right-click in the Project Explorer and select New Simulation | FLO-2D. Components can then be linked to simulations by dragging the components under the simulation or by right-clicking on the component item and using the Link To submenu.

Components for the FLO-2D simulation include the following:

  • Cartesian Grid

FLO-2D Simulation Menu

Right-clicking on a FLO-2D simulation provides a menu with the standard simulation menu commands and the following commands specific to FLO-2D:

  • Model Check – Launches the model checker to look for problems with the simulation setup.
  • Export FLO-2D – Exports the *.boundary and *.grid files containing the grid and boundary information that will be converted during the simulation run.
  • Launch FLO-2D – Brings up the FLO-2D model wrapper and starts the simulation run. At the end of the simulation run, FLO-2D will have created a basic input data files for use in the FLO-2D program.
  • Save, Export, and Launch FLO-2D – Completes the processes of saving the SMS project, exporting the FLO-2D files, and launching the FLO-2D simulation run.

FLO-2D Files

A FLO-2D simulation in SMS can generate a number of files for use in the FLO-2D program. The following files are generated:

  • *.boundary – Contains the boundary data generated in SMS. This file is used to generate the other files and must be created before running the FLO-2D simulation.
  • *.grid – Contains the 2D grid data generated in SMS. This file is used to generate the other files and must be created before running the FLO-2D simulation.
  • CADPTS.DAT – Basic input file for FLO-2D. Topographic file containing floodplain grid point data.
  • CONT.DAT – Basic input file for FLO-2D. Contains system control data for the FLO-2D project.
  • FPLAIN.DAT – Basic input file for FLO-2D. Topographic file containing floodplain grid element data.
  • TOLER.DAT – Basic input file for FLO-2D. Contains numerical stability control data.

Related Topics

External Links


v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=User:Jcreer/SMS:FLO-2D&oldid=147258"