SMS:SRH-2D Pressure Flow Bridge Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
To build an [[SMS:SRH-2D|SRH-2D]] model using a culvert, use the following steps:
To build a pressure flow bridge for an [[SMS:SRH-2D|SRH-2D]] model, use the following steps:
{| class="wikitable collapsible collapsed"
{{SRH Bridge Pressure Flow Workflow}}
|-
!width="800" style="text-align:left;"|1. SRH-2D project setup.
|-
|width="800"|
{{SRH-2D Project Setup}}
|}
 
{|class="wikitable collapsible autocollapse"
|-
!width="800" style="text-align:left;"|2. Create pressure flow boundary conditions.
|-
|width="800"|
:The pressure flow boundary conditions must be defined before running the simulation. To do this:
:#Create a [[SMS:SRH Coverages#Boundary Conditions Coverage|boundary conditions]] coverage.
:#Create boundary condition [[SMS:Map Module Tools|arcs]] for the pressure flow.
:#Assign the boundary condition attributes to the pressure flow arcs.
:#Modify the materials coverage.
|}
{|class="wikitable collapsible autocollapse"
|-
!width="800" style="text-align:left;"|3. Specify the simulation parameters.
|-
|width="800"|
:The the simulation parameters must be defined before running SRH-2D. To do this:
:# Create new [[SMS:Simulations|simulation]].
:# Add [[SMS:SRH Simulation|components to simulation]].
:# Set up the simulation [[SMS:SRH Model Control|''Model Control'']] parameters.
|}
{|class="wikitable collapsible autocollapse"
|-
!width="800" style="text-align:left;"|4. Run the SRH-2D simulation.
|-
|width="800"|
:# Save the project.
:# [[SMS:Model Checker|Check the model]].
:# [[SMS:SRH Simulation#Running an SRH-2D Simulation|Simulation execution]].
:# [[SMS:SRH-2D#Troubleshooting|Troubleshooting]].
|}
{|class="wikitable collapsible autocollapse"
|-
!width="800" style="text-align:left;"|5. Review results.
|-
|width="800"|
Results for the pressure flow can be visualized by doing the following:
:# Create observation arcs.
:# Run the [[SMS:Plot Window|Plot Wizard]].
 
|}
 




{{Navbox SMS}}
{{Navbox SMS}}


[[Category:SMS Workflows]]
[[Category:SRH-2D Workflows|Pressure]]
[[Category:SRH-2D]]

Latest revision as of 15:27, 8 March 2016

To build a pressure flow bridge for an SRH-2D model, use the following steps:

1. Create two bridge pressure flow boundary condition arcs.
Create two feature arcs representing the upstream (beginning) and downstream (ending) locations of the pressure zone.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
2. Assign bridge pressure flow boundary conditions.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select both bridge pressure flow arcs.
  2. Right-click and select the Assign Linear BC... command.
  3. In the SRH-2D Linear BC dialog, assign the bridge pressure flow boundary conditions specifying the upstream and downstream arcs and the ceiling elevation and Manning roughness coefficient.