Template:FEMWATER Set Up Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
m (Protected "Template:FEMWATER Set Up Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
(No difference)

Revision as of 19:40, 27 January 2017

1. Create a new FEMWATER simulation.
  1. Select the FEMWATER | New Simulation menu command.
  2. Enter options in the FEMWATER Run Options dialog.
2. Enter analysis options.
1. Enter run options.
  1. Select the FEMWATER | Run Options menu command.
  2. Enter options in the FEMWATER Run Options dialog.
2. Define the geometry file.
  1. Select the FEMWATER | Geometry File menu command.
  2. Enter options in the Geometry File dialog.
3. Enter titles.
  1. Select the FEMWATER | Titles menu command.
  2. Enter options in the FEMWATER Geometry and Model Title Cards dialog.
4. Set initial conditions.
  1. Select the FEMWATER | Initial Conditions menu command.
  2. Enter options in the FEMWATER Initial Conditions dialog.
5. Set iteration parameters.
  1. Select the FEMWATER | Iteration Parameters menu command.
  2. Enter options in the FEMWATER Iteration Parameters dialog.
6. Define particle tracking parameters.
  1. Select the FEMWATER | Particle Tracking menu command.
  2. Enter options in the FEMWATER Particle Tracking dialog.
7. Set time controls parameters. (For transport modeling)
  1. Select the FEMWATER | Time Control menu command.
  2. Enter options in the FEMWATER Time Control dialog.
8. Select output control.
  1. Select the FEMWATER | Output Control menu command.
  2. Enter options in the FEMWATER Output Control dialog.
9. Define fluid process.
  1. Select the FEMWATER | Fluid Properties menu command.
  2. Enter options in the FEMWATER Fluid Properties dialog.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:FEMWATER_Set_Up_Workflow&oldid=118741"