GMS:DPT Package

Example of the DPT Package dialog

The Dual Porosity Transport (DPT) package is used for solutions to contaminant transportation in a steady state or transient flow field in the immobile domain of the dual porosity system.

The DPT Package dialog is divided into two parts: one on the left which shows the main sections, and one on the right which shows the inputs for the current section.

Comments

Comment lines can be added and will appear at the top of the DPT file. Use the Add Row button to create comments. Comments can be removed using the Delete Row button.

Variables

Variables corresponding to item 1a in the DPT input file.

• Concentration unit, immobile (IDPTCON)
• Transport active domain, immobile (ICBNDIMFLG)
• Adsorption, immobile (IADSORBIM)
• Dispersion formula, immobile (IDISPM)
• Zero order decay, immobile (IZODIM)
• First order decay, immobile (IFODIM)
• Hydraulic conductivity for fracture only (FRAHK)
• Immobile saturation equals mobile (MOBILESAT)
• Immobile saturation is input (INPUTSAT)

Aquifer Properties

Cell-by-cell inputs independent of species such as porosity. The table in this section contains four columns.

• Property Name – This column lists all of the available parameter types. The following parameters are available.
  • PHF
  • PRSITYIM
  • BULKDIM
  • DLIM
  • DDTTR
  • SIM
• Use Constant
• Constant Value
• Array Editor

Species Properties

Cell-by-cell inputs that depend on the species, such as adsorption. The table in this section contains five columns.

• Species ID
• Property Name
• Use Constant
• Constant Value
• Array Editor