SMS:FESWMS Structures Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
m (Protected "SMS:FESWMS Structures Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
No edit summary
Line 1: Line 1:
To create [[SMS:FESWMS Hydraulic Structures|FESWMS hydraulic structures]], follow the steps below:
To create [[SMS:FESWMS Hydraulic Structures|FESWMS hydraulic structures]], follow the steps below listed for each structure type:


{{FESWMS Structures Workflow}}
{{FESWMS Structures Workflow}}

Revision as of 17:54, 1 July 2016

To create FESWMS hydraulic structures, follow the steps below listed for each structure type:

1. Create a channel link structure.
  1. Using the Select Mesh Node Select Point Tool.svg tool, select one or two nodes for the channel link.
  2. Select FESWMS | Channel Link menu command.
  3. Assign channel link attributes in the FESWMS Channel Link dialog.
2. Create a culvert structure.
  1. Using the Select Mesh Node Select Point Tool.svg tool, select inlet and outlet nodes for the culvert.
  2. Select FESWMS | Culvert menu command.
  3. Assign channel link attributes in the FESWMS Culvert dialog.
3. Create a drop inlet structure.
  1. Using the Select Mesh Node Select Point Tool.svg tool, select one or two nodes for the drop inlet.
  2. Select FESWMS | Drop Inlet menu command.
  3. Assign channel link attributes in the Drop Inlet Definition dialog.
4. Create a gate structure.
  1. Using the Select Mesh Node Select Point Tool.svg tool, select one or two nodes for the gate.
  2. Select FESWMS | Gate menu command.
  3. Assign channel link attributes in the FESWMS Gate dialog.
5. Create a pier structure.
  1. Using the Select Elements SMS Select Mesh Element Tool.svg tool, select pier elements in the mesh.
  2. Select FESWMS | Pier menu command.
  3. Assign peir attributes in the FESWMS Pier Definition dialog.
6. Create a weir structure.
1. Create two weir boundary condition nodestrings.
  1. Using the Create Nodestrings SMS Create Nodestring Tool.svg tool, create a nodestring from right to left.
  2. Create a second nodestring opposite the first nodestring,
2. Assign weir attributes.
  1. Using the Select Nodestring SMS Select Nodestring Tool.svg tool, select both weir nodestrings.
  2. Select FESWMS | Weir menu command.
  3. Assign weir attributes in the FESWMS Weir dialog.


v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:FESWMS_Structures_Workflow&oldid=107580"