GMS:HydroGeoSphere Renumber UGrid

Renumber UGrid for HydroGeoSphere

The Renumber UGrid tool renumbers a 3D UGrid to meet HydroGeoSphere requirements.

Figure 1. HydroGeoSphere node sheet numbering example

Figure 2. HydroGeoSphere local node numbering (HGS Reference Manual figure 2.1, page 18)

The 3D UGrid consists of a set of vertically offset node sheets, each of which is identical in 2D. Between consecutive node sheets is a layer of elements.

• The ordering of elements within each layer is identical, as is the ordering of nodes within each node sheet.
• Nodes are ordered from the bottom sheet (bottom of the domain) to the top sheet (top of the domain).
• Similarly, elements are ordered from the bottom layer (bottom of domain) to the top layer (top of domain).
• Any ordering of elements and nodes within a 2D layer or sheet is fine, so long as it is consistent among all layers and sheets.
• Local node numbering per cell must follow the convention illustrated in Figure 2.

Input Parameters

• Input UGrid – The UGrid to be renumbered.

Output Parameters

• Output UGrid – The name of the UGrid that will be created.

Current Location in Toolbox

HydroGeoSphere | Renumber UGrid