SMS:Generic Model Graphical Interface

The Generic Model Graphical Interface includes tools to assist with creating, editing and debugging a Generic Model. The Generic Model interface exists in the Mesh Module.

Define Model

The Define Model Dialog is used to setup the options that apply to the simulation as a whole.

Boundary Conditions

All numeric models require boundary condition data. Generic Mesh Model boundary conditions can be defined on nodestrings, nodes, and elements. See Generic Model BC Nodestrings, Generic Model BC Nodes, and elements for more information.

Material Properties

Each element is assigned a material type. Material properties describe the hydraulic characteristics of each material type.

Saving the Model

The Generic Model Files are written automatically with the SMS project file or can be saved separately using the File | Save Mesh or File | Save As menu commands. See Generic Model Files for more information on the files used for the Generic Model run.

Generic Model Menu

See Generic Model Menu for more information.

Related Topics

• Generic 2D Nodal BC, Nodestring and Element Display Options
• Mesh Module

Template:Generic Model

SMS

Modules: Mesh Module · Cartesian Grid Module · Scatter Module · Map Module · GIS Module · Particle Module
Models: ADCIRC · BOUSS-2D · CGWAVE · CMS-Flow · CMS-Wave · FESWMS · FVCOM · Generic Mesh Model · GENESIS · HYDRO AS-2D · PTM · SRH-2D · Steering · STWAVE · TABS · TUFLOW