SMS:ADCIRC Boundary Conditions

Much of ADCIRC's versatility as a model is due to the large number of different boundary types and boundary conditions available in the model.

ADCIRC Boundary Types

Boundary types are assigned to feature arcs in the conceptual mode or nodestrings on the ADCIRC mesh. Correct boundary type assignments are very important to run a successful ADCIRC project. The following boundary types are available in SMS for ADCIRC:

• Unassigned - default, no boundary condition assigned
• Mainland - land or coastline boundary
• Island - this can be selected for a closed feature arc
• Normal Flow - assigned across the nodes of the mesh, therefore the parameters of this boundary type can only be modified after a mesh has been created and the mesh module is currently selected
• Normal Wave Radiation
• Mainland Barrier
• Island Barrier - requires 2 nodestrings
• Weir - requires 2 nodestrings with the same number of nodes
• Zero Normal Velocity Gradient
• Ocean

ADCIRC Boundary Conditions

Depending upon the specified boundary type, the following boundary conditions are available:

Boundary Condition	Boundary Type
Essential w/ Tangential Slip	Mainland Island Normal Flow Mainland Barrier
Essential w/o Tangential Slip	Mainland Island Normal Flow Mainland Barrier
Natural (w/ Tangential Slip)	Mainland Island Normal Flow Mainland Barrier
Tidal Constituents	Ocean
Curve	Ocean
Extract from Dataset	Ocean

Nodal Boundary Conditions (Recording Stations)

The following boundary conditions can be assigned to an ADCIRC mesh node:

2D Station Types

• Elevation
• Velocity
• Concentration
• Meteorological

3D Staion Types

• Density/Temperature/Salinity
• Velocity
• Turbulence

Description of Station

Stations can be assigned a name to make station identification easier.

Related Links

• ADCIRC
• Coverage
• Linear Truncation Error Analysis (LTEA)
• Meshes
• Model Control
• Spatial Attributes
• Steering

SMS

Modules: Mesh Module · Cartesian Grid Module · Scatter Module · Map Module · GIS Module · Particle Module
Models: ADCIRC · BOUSS-2D · CGWAVE · CMS-Flow · CMS-Wave · FESWMS · FVCOM · Generic Mesh Model · GENESIS · HYDRO AS-2D · PTM · SRH-2D · Steering · STWAVE · TABS · TUFLOW