SMS:SRH-2D Pressure Flow Bridge Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
To build an [[SMS:SRH-2D|SRH-2D]] model using a pressure flow bridge, use the following steps:
{| class="wikitable collapsible collapsed"
|-
!width="800" style="text-align:left;"|1. SRH-2D project setup.
|-
|width="800"|
{{SRH-2D Project Setup}}
|}
{|class="wikitable collapsible autocollapse"
{|class="wikitable collapsible autocollapse"
|-
|-
!width="800" style="text-align:left;"|2. Create pressure flow boundary conditions.
!width="800" style="text-align:left;"|2. Create culvert boundary conditions.
|-
|-
|width="800"|
|width="800"|
:The culvert boundary conditions must be defined before running the simulation. To do this:
:#Create a [[SMS:SRH Coverages#Boundary Conditions Coverage|boundary conditions]] coverage.
:#Create a [[SMS:SRH Coverages#Boundary Conditions Coverage|boundary conditions]] coverage.
:#Specify the HY-* culvert definition file.
:#Create boundary condition [[SMS:Map Module Tools|arcs]] for the culvert.
:#Specify the HY-8 culvert definition file.
:#Assign the boundary condition attributes and define the culvert in HY-8.
:#Assign the boundary condition attributes and define the culvert in HY-8.
:#Modify the materials coverage.
:#Modify the materials coverage.
Line 19: Line 13:
{|class="wikitable collapsible autocollapse"
{|class="wikitable collapsible autocollapse"
|-
|-
!width="800" style="text-align:left;"|3. Specify the initial conditions of the stream.
!width="800" style="text-align:left;"|3. Specify the simulation parameters.
|-
|-
|width="800"|
|width="800"|
:#
:The initial conditions of the stream must be defined in the simulation. To do this:
:# Create new [[SMS:Simulations|simulation]].
:# Add [[SMS:SRH Simulation|components to simulation]].
:# Set up the simulation [[SMS:SRH Model Control|''Model Control'']] parameters.
:# Specify the restart conditions file under initial conditions.
|}
|}
{|class="wikitable collapsible autocollapse"
{|class="wikitable collapsible autocollapse"
|-
|-
!width="800" style="text-align:left;"|4. SRH-2D simulation setup.
!width="800" style="text-align:left;"|4. Run the SRH-2D simulation.
|-
|-
|width="800"|
|width="800"|
:# Create new [[SMS:Simulations|simulation]].
:# Save the project.
:# Add [[SMS:SRH Simulation|components to simulation]].
:# Set up [[SMS:SRH Model Control|Model Control]] parameters.
:# [[SMS:Model Checker|Check the model]].
:# [[SMS:Model Checker|Check the model]].
:# [[SMS:SRH Simulation#Running an SRH-2D Simulation|Simulation execution]].
:# [[SMS:SRH Simulation#Running an SRH-2D Simulation|Simulation execution]].

Revision as of 16:35, 13 August 2015

2. Create culvert boundary conditions.
The culvert boundary conditions must be defined before running the simulation. To do this:
  1. Create a boundary conditions coverage.
  2. Create boundary condition arcs for the culvert.
  3. Specify the HY-8 culvert definition file.
  4. Assign the boundary condition attributes and define the culvert in HY-8.
  5. Modify the materials coverage.
3. Specify the simulation parameters.
The initial conditions of the stream must be defined in the simulation. To do this:
  1. Create new simulation.
  2. Add components to simulation.
  3. Set up the simulation Model Control parameters.
  4. Specify the restart conditions file under initial conditions.
4. Run the SRH-2D simulation.
  1. Save the project.
  2. Check the model.
  3. Simulation execution.
  4. Troubleshooting.
5. Review results.
  1. Open _XMDF file.
  2. Results layers.
  3. Observation lines.
  4. Summary table.
  5. Run the Plot Wizard.
  6. Data calculator.


v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:SRH-2D_Pressure_Flow_Bridge_Workflow&oldid=90214"