GMS:Borehole Display Options
From XMS Wiki
The properties of all borehole data that GMS displays on the screen can be controlled through the Borehole tab of the Display Options dialog. This dialog is opened by right-clicking on the Borehole Data File:BoreholeFolder.png entry in the Project Explorer and selecting the Display Options command. It can also be accessed from the from the Display menu or the Display Options File:Display Options macro.svg macro. The following table describes the display options available for the Borehole module.
Display Option | Description |
---|---|
Borehole edges | This option controls the display of the lines that show the outline of the boreholes. The color of the borehole edges can be adjusted according to the following options:
|
Borehole faces | If this option is on then the borehole segments are displayed are filled polygons. |
Diameter | This value determines the display size of the boreholes in the graphics window in world length coordinates. |
Num. slices | This edit field determines the number of slices to display the borehole. The default is 6 making the boreholes display as hexagons. |
Hole names | If the Hole names box is checked, the name of each hole is displayed at the top of the hole. |
Water table | If the Water table box is checked, an icon representing the water table is displayed at the water table elevation of each borehole. |
Horizon IDs | The horizon IDs toggle controls the display of the horizon id next to each borehole contact. |
Cross sections edges | The horizon ids toggle controls the display of the horizon id next to each borehole contact. 3 options are available for the cross section edges:
|
Cross section faces | If this option is on then the borehole segments are displayed as filled polygons. |
Cross section names | If this option is on then the borehole names are displayed above the boreholes. |
Material display | This radio group determines the display color of the boreholes. The borehole segments can be colored either by the Soil or HGU assigned. |
Cross Section Highlighting for Horizon Coverages | Toggle display of the lines showing the part of the cross sections where the material with the horizon ID of the active horizon coverage exists. This highlighting only appears when in plan view and the active coverage is a horizon coverage. |
Points | If the Points box is checked, every sample data point is displayed. If the Use color ramp box is checked, the points are colored according to the current dataset and the current color ramp settings. |
Lines | If the Lines box is checked, the sample points are connected by a series of line segments. If the Use color ramp box is checked, the line segments are colored according to the current dataset and the current color ramp settings. |
Data plots | If the Data plots box is checked, a plot of the current dataset is drawn next to each borehole with sample data. The width (horizontal length) can be adjusted and the options associated with the plot scale, plot axes, etc., can be accessed by selecting the Plot Options button. |
Data range | By default, the minimum color on the color ramp is associated with the minimum dataset value and the maximum color is associated with the maximum dataset value. The ramp of colors can be confined to a smaller interval defined by the Maximum and Minimum values. This forces all of the color gradation to be concentrated in a particular range of interest. |
GMS – Groundwater Modeling System | ||
---|---|---|
Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids | |
Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
Aquaveo |