GMS:MODFLOW 6 ZONEBUDGET Workflow

From XMS Wiki
Revision as of 19:29, 15 November 2022 by Jcreer (talk | contribs)
Jump to navigationJump to search

To use ZONEBUDGET in an existing MODFLOW 6 project, use the following processes:

1. Create the Zones package.
  1. Use the New Package | Zones command to open the Zone File dialog.
  2. Using the Zone File dialog, define the zones.
  3. Right-click on the MODFLOW 6 simulation and select Save Simulation to export the zone package file.
2. Run ZONEBUDGET.
  1. Under the MODFLOW solution folder in the Project Explorer, right-click on the file ending in ".cbc" and select Run ZONEBUDGET.
3. Visualize the results of ZONEBUDGET.
  1. Under the folder ending in "zone_budget", double-click on either file to open it in an outside program.
  • The file ending in ".lst" has the results of ZONEBUDGET at the bottom under a section that begins VOLUME BUDGET.
  • The file ending in ".csv" can be opened in a spreadsheet application or text editor.
v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:MODFLOW_6_ZONEBUDGET_Workflow&oldid=157077"