CMS-Flow Hard Bottom Dataset Tool
From XMS Wiki
Jump to navigationJump to search
CMS-Flow Hard Bottom Dataset
The CMS-Flow Hard Bottom Dataset tool generates a cell based dataset on a CMS-Flow grid that may be used as the hard bottom for a CMS-Flow simulation.
This tool is used with a CMS-Flow "Hard Bottom" coverage where the user can specify different types of polygons that are applied to the UGrid to create the hard bottom dataset.
Three different types of polygons may be assigned to the coverage:
1. Non-erodible cell
- The hard bottom dataset value is set to the cell elevation.
2. Specified distance erodible cell
- The hard bottom dataset value is set to the cell elevation minus the specified distance associated with the polygon. For example, the cell has an elevation of -4.5 and the specified erodible distance is set to 1.0, the hard bottom value would be -5.5.
3. Specified depth erodible cell
- The hard bottom dataset value is set to the specified depth associated with the polygon. This value is interpreted as an elevation (Z).
All other cells not covered by a polygon as described above will be declared as fully-erodible.
Input Parameters
- Target UGrid – The UGrid that is being used in the CMS-Flow simulation. This grid must have elevations defined at cells.
- Input hard bottom coverage containing polygons – The hard bottom coverage.
Output Parameters
- Hard bottom dataset name – Specify the name of the output dataset.
Current Location in Toolbox
CMS-Flow/CMS-Flow Hard Bottom Dataset
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
