User:Jcreer/SMS:AdH Interface

AdH Coverages

The AdH interface includes a few map coverages. These map coverages are used to provide input for the AdH simulation. AdH use the following model specific coverages:

• Boundary Conditions
• Materials
• Sediment Materials

AdH Boundary Conditions

ADH boundary conditions consist of two specification types (Dirichlet and Natural) and three condition types (flow, pressure, and transport). Dirichlet data is applied on the domain to individual nodes or to groups of nodes (defined with nodestrings). Natural data (flux) is applied through edges of the domain defined by nodestrings and includes a friction specification. A node or nodestring can be assigned only one condition option from each of the three condition types (two flow conditions cannot be assigned to a single node).

The boundary conditions coverage for AdH allows assigning boundary condition attributes for both arcs and points.

Arc Attributes

Example of the AdH Arc Attributes dialog

The Arc Attributes dialog is reached by right-clicking on an arc in the AdH boundary conditions and selecting the Assign Arc Attributes command. In the dialog, the Arc type option have several boundary condition attributes for the selected arc. The following Arc type options are as follows:

• "Off" – No attributes will be assigned to the arc.
• "Natural outflow (OB OF)" – allows flow out without any modification to flow properties. Can be specified on boundaries where the exact flow conditions are unknown.
• "Discharge (NB DIS)" – Applies subcritical inflow as a natural total discharge boundary condition.
  • Discharge – Clicking Edit opens the XY Series Editor dialog where discharge values can be entered.
• "Flow (NB OVL)" – Applies inflow as a natural unit discharge boundary condition.
  • Flow per unit area – Clicking Edit opens the XY Series Editor dialog where discharge values can be entered.
• "Water surface elevation (NB OTW)" – Links a particular time series of water surface elevation to the boundary condition.
  • Elevation – Clicking Edit opens the XY Series Editor dialog where water surface elevation values can be entered.
• "Spillway (NB SPL)" – Specifies spillway flow.
  •  % flow out – Clicking Edit opens the XY Series Editor dialog where weir coefficient values can be entered.
• "Tidal boundary (NB TID)" – Indicates tidal constituents will be applied to the boundary.
• "Stage discharge boundary (NB SDR)" – Specifies a stage-discharge boundary.
  • Coefficient – Specified constants for coefficients A–E.
• "Velocity and depth (DB OVH)" – Dirichlet boundary condition for supercritical flow.
  • Snapping type – Defines how the boundary conditions are applied to mesh.
    • "Point snap" – Applies the attributes to the mesh nodes or points upon export.
    • "Edgestring snap" – Applies the attributes to the mesh element edge upon export.
    • "Midstring snap" – Applies the attributes to the center of the mesh elements upon export.
  • X velocity – Clicking Edit opens the XY Series Editor dialog where x-velocity values can be entered.
  • Y velocity – Clicking Edit opens the XY Series Editor dialog where y-velocity values can be entered.
  • Depth – Clicking Edit opens the XY Series Editor dialog where depth values can be entered.
• "Stationary lid elevation (DB LDE)" – Allows assigning lid elevations to an arc.
  • Snapping type
    • Point snap
    • Edgestring snap
    • Midstring snap
  • Elevation – Clicking Edit opens the XY Series Editor dialog where elevation values can be entered.
• "Depth of water under stationary lid (DB LDH)" – Allows assigning lid depths to an arc.
  • Snapping type
    • Point snap
    • Edgestring snap
    • Midstring snap
  • Depth – Clicking Edit opens the XY Series Editor dialog where depth values can be entered.
• "Floating stationary object (DB LID)" – Allows assigning liddraft to an arc.
  • Snapping type
    • Point snap
    • Edgestring snap
    • Midstring snap
  • Draft of lid – Clicking Edit opens the XY Series Editor dialog where draft values can be entered.

Arc Friction

Example of the AdH Friction dialog

Friction controls are used to compute estimated values of the friction induced by several types of bed roughness and linear roughness conditions.

Friction can be applied to a feature arc by right-clicking on the arc and selecting the Assign Friction command. In the Friction dialog, specify the Friction type as one of the following options:

• "Off" – No friction will be applied to the arc.
• "Manning's N (MNG)" – Friction will be applied using Manning's n.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Manning's n – Specify the value of Manning's n.
• "Manning's Equation (MNC)" – Friction will be applied using the classic formulation Manning's n.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Manning's n – Specify the value of Manning's n.
• "Equivalent roughness height (ERH)" – Friction will be applied using equivalent sand roughness height.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Roughness height – Enter a value for the equivalent sand roughness height.
• "Submerged aquatic vegetation (SAV)" – Compute the drag coefficient associated with the bottom shear stress resulting from a steady current field over a bed consisting of submerged aquatic vegetation.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Roughness height of canopy – Enter a value for the roughness height of the SAV canopy.
  • Undeflected stem height – Enter a value for the undeflected stem height of the SAV.
• "Un-submerged rigid vegetation (URV)" – Compute a shear stress coefficient for use in computing the bottom shear stress resulting from a steady current through rigid, unsubmerged vegetation.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Bed roughness height – Enter a value for the bed roughness height.
  • Average stem diameter – Enter a value for the average stem diameter.
  • Average stem density – Enter a value for the average stem density.
• "Equivalent drag obstructions (EDO)" – Computes a shear stress coefficient for use in computing the shear stress resulting from a steady current through or over an evenly distributed field of flow obstructions.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Bed roughness height – Enter a value for the bed roughness height.
  • Obstruction diameter – Enter a value for the average obstruction diameter.
  • Obstruction height – Enter a value for the average obstruction height.
• "Ice friction (ICE, IRH, BRH)" – Applies as a pressure field on the water surface to account for the effects that stationary ice on the water surface has on the flow below.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Ice thickness
  • Ice density – Enter a value for the density of ice.
  • Ice movement
  • Ice roughness height – Enter a value for the equivalent ice roughness height.
  • Bed roughness height – Enter a value for the equivalent bed roughness height.
• "Dune friction (DUN)" – Invokes the bedform friction model.
  • Edge/mid string
    • Edgestring
    • Midstring
  • Dune factor – Enter a value for the bedform roughness calibration coefficient.
  • Dune SEDLIB Inclusion – Turn on to use the sediment model for bedload
  • Dune D50 – Enter a value for the d50 of the bed material.
  • Dune D90 – Enter a value for the d90 of the bed material.
• "Submerged dike (SDK)" – Simulates the loss associated with the expansion of flow downstream of a submerged dike or weir.
  • Dike height – Enter a value for the height of the dike above the bed.
• "Bridge deck (BRD)" – Simulates the the loss associated with a bridge deck.
  • Bridge deck elevation – Enter a value for the elevation of the bridge deck.
  • Bridge deck thickness – Enter a value for the thickness of the bridge deck.

Flux Output

The Flux Output dialog

The flux output calculates of flow and constituent mass across strings. To assign flux to a feature arc, right-click on the arc and select the Assign Flux command to open the Flux Output dialog. The Flux Output dialog contains the following options:

• Flux output – Turn on to include fluz output calculations in the model run.
• Edgestring – Select if the flux output is to be calculated along the edge of the mesh domain.
• Midstring – Select if the flux output is to be calculated from internal strings inside the mesh domain.

Sediment Diversion

Example of the AdH Sediment Diversion dialog

• Sediment diversion – Turn on to include sediment diversion at the feature object location.
  • Edgestring/midstring
    • Edgestring
    • Midstring
  • Top elevation of the zone of withdrawal
  • Bottom elevation of the zone of withdrawal
  • Bottom elevation of the main channel

Arc Transport Constituents

Example of the Arc Transport Constituent dialog

The Arc Transport Constituents dialog allows assigning transport constituents to an arc. This requires that transport constituents component to have been created in the AdH simulation. To assign transport constituents to a feature arc, right-click on the arc and select the Assign Arc Transport command to open the Arc Transport Constituents dialog. The Arc Transport Constituents dialog contains the following options:

• Transport constituents – Turning on this option will allow assigning transport constituents.
  • Transport constituents – Clicking the Select button will open the Select Transport Constituent dialog where a transport component can be selected. Once the transport component has been selected, the table in this section can be completed.
    • Name – This column will display the name of the transport constituents that are active in the Transport Constituents dialog.
    • Type – This column allows setting the transport constituent to be "None", "Dirichlet", or "Natural".
    • Time Series – This column becomes active if the "Dirichlet" or "Natural" type is selected. Clicking the Edit Curve button will open the XY Series Editor dialog where the time series can be entered.
    • Snapping Method
• Sediment transport constituents – Turning on this option will allow assigning sediment transport constituents.
  • Sediment transport constituents – Clicking the Select button will open the Select Sediment Transport Constituent dialog where a transport component can be selected. Once the transport component has been selected, the table in this section can be completed.
    • Name – This column will display the name of the transport constituents that are active in the Sediment Transport Constituents dialog.
    • Type – This column allows setting the transport constituent to be "None", "Dirichlet", or "Natural".
    • Time Series – This column becomes active if the "Dirichlet" or "Natural" type is selected. Clicking the Edit Curve button will open the XY Series Editor dialog where the time series can be entered.
    • Snapping Method

Select Transport Constituents

Example of the AdH Select Transport Constituents dialog

When working with transport constituents, the transport constituent component in the simulation needs be attached to transport constituents attributes assigned to feature objects. In the Project Explorer, right-clicking on the AdH boundary condition coverage and selecting the Assign Transport command will being up the Select Transport Constituents dialog. This dialog allows assigning the transport feature object attributes to the transport components.

• Transport constituents – Clicking the Select button in this section will being up the Select Transport Constituents dialog. In the Select Transport Constituents dialog, the transport component can be assigned to the coverage.
• Sediment transport constituents – Clicking the Select button in this section will being up the Select Sediment Transport Constituents dialog. In the Select Sediment Transport Constituents dialog, the transport component can be assigned to the coverage.

Point Attributes

Example of the AdH Point Attributes dialog

The Point Attributes dialog is reached by right-clicking on a point in the AdH boundary conditions and selecting the Assign Point Attributes command. In the dialog, the Point type option have several boundary condition attributes for the selected point. The following Point type options are as follows:

• "Off" – No attributes will be assigned to the point.
• "Velocity and depth (DB OVH)" – Dirichlet boundary condition for supercritical flow.
  • X velocity – Clicking Edit opens the XY Series Editor dialog where x-velocity values can be entered.
  • Y velocity – Clicking Edit opens the XY Series Editor dialog where y-velocity values can be entered.
  • Depth – Clicking Edit opens the XY Series Editor dialog where depth values can be entered.
• "Stationary lid elevation (DB LDE)" – Allows assigning lid elevations to an arc.
  • Elevation – Clicking Edit opens the XY Series Editor dialog where elevation values can be entered.
• "Depth of water under stationary lid (DB LDH)" – Allows assigning lid depths to an arc.
  • Depth – Clicking Edit opens the XY Series Editor dialog where depth values can be entered.
• "Floating stationary object (DB LID)" – Allows assigning liddraft to an arc.
  • Draft of lid – Clicking Edit opens the XY Series Editor dialog where draft values can be entered.
• "Wind Definition (OP WND)" – Defines wind stressing.
  • Wind – Clicking Edit opens the XY Series Editor dialog where wind values can be entered.

Point Transport Constituents

Example of the Point Transport Constituent dialog

The Point Transport Constituents dialog allows assigning transport constituents to a point. This requires that transport constituents component to have been created in the AdH simulation. To assign transport constituents to a feature point, right-click on the point and select the Assign Point Transport command to open the Point Transport Constituents dialog. The Popint Transport Constituents dialog contains the following options:

• Transport constituents – Turning on this option will allow assigning transport constituents.
  • Transport constituents – Clicking the Select button will open the Select Transport Constituent dialog where a transport component can be selected. Once the transport component has been selected, the table in this section can be completed.
    • Name – This column will display the name of the transport constituents that are active in the Transport Constituents dialog.
    • Type – This column allows setting the transport constituent to be "None" or "Dirichlet".
    • Time Series – This column becomes active if the "Dirichlet" type is selected. Clicking the Edit Curve button will open the XY Series Editor dialog where the time series can be entered.
• Sediment transport constituents – Turning on this option will allow assigning sediment transport constituents.
  • Sediment transport constituents – Clicking the Select button will open the Select Sediment Transport Constituent dialog where a transport component can be selected. Once the transport component has been selected, the table in this section can be completed.
    • Name – This column will display the name of the transport constituents that are active in the Sediment Transport Constituents dialog.
    • Type – This column allows setting the transport constituent to be "None" or "Dirichlet".
    • Time Series – This column becomes active if the "Dirichlet" type is selected. Clicking the Edit Curve button will open the XY Series Editor dialog where the time series can be entered.

AdH Materials

Example of the AdH Material Lists and Properties dialog

Material properties are set for AdH on an AdH materials coverage. In the Project Explorer, define the material attributes by right-clicking the materials coverage and selecting Material List and Properties to open the Material List and Properties dialog. The Material List and Properties dialog contains the following options:

• Transport constituents – Turning on this option will allow assigning transport constituents.
  • Transport constituents – Clicking the Select button will open the Select Transport Constituent dialog where a transport component can be selected.
• Add Rows – Adds a material item to the list below this.
• Delete Rows – Removes a selected material.
• Change all material textures – Brings up the Texture Attributes dialog where the texture for all materials can be changed.
• Import – Brings up an Open dialog where an AdH material file (*.adh_mat) can be imported into the dialog.
• Export – Brings up a Save dialog where an AdH materila file (*adh_mat) can be exported.
• Material list – The Materials list contains two columns (Color and Name) for the defined materials. The default "OFF" material cannot be edited (except the display pattern) and will always be at the top of the spreadsheet regardless of sorting. Each material is accompanied by a Color button in the Color column. To select a color and pattern, click on the button to open the Texture Attributes window. On the right side of the dialog, the numeric properties of the material are displayed and can be edited.

General

The General tab of the AdH Material List and Properties dialog contains the following options:

• Eddy viscosity method – Defines the eddy viscosity for the simulation using one of two methods. Both methods cannot be used for

one material, but both can be used in a single model.

• • "Estimated (EEV)" – Defines eddy viscosity utilizing an equation to estimate the value.
    • Estimated eddy viscosity weighing factor – Enter a value for the weighting factor.
    • Estimated eddy viscosity method – Select one of the following methods:
      • "1 – Isotropic"
      • "2 – Anisotropic"
      • "3 – Smagorinsky"
      • "4 – Stansby"
  • "Constant (EVS)" – Defines eddy viscosity through a user specified constant value.
    • Vxx eddy viscosity
    • Vxy eddy viscosity
    • Vyy eddy viscosity
• Refinement tolerance – Enter a value to refine and relax the resolution of the model mesh during the simulation run.
• Max refinement level – Enter a value for the maximum level of mesh refinement.
• Wind properties – Check on to include wind stress calculations.
  • Stress formulation – Select the method that will be used for wind stress.
    • "0 – no transform"
    • "1 – Wu"
    • "2 – Teeter"
  • Attenuation – Enter a scale factor to increase or decrease the wind shear stress magnitude.
• Coriolis – Turn on to include the Coriolis force due to the earth’s rotation.
  • Coriolis latitude – Enter a value for the latitude in decimal degrees.
• Include meteorologic condition – Turn on to include rain or evaporation for the material.
  • Rain or evaporation – Click the Edit button to open an XY Series Editor dialog where rainfall or evaporation data can be entered.

Friction

• Friction
  • "Off" – No friction will be applied to the model.
  • "Manning's n (MNG)" – Friction will be applied using Manning's n.
    • Manning's n – Specify the value of Manning's n.
  • Manning's Equation (MNC)
    • Manning's n
  • Equivalent roughness height (ERH)
    • Roughness height
  • Submerged aquatic vegetation (SAV)
    • Roughness height of canopy
    • Undeflected stem height
  • Un-submerged rigid vegetation (URV)
    • Bed roughness height
    • Average stem diameter
    • Average stem density
  • Equivalent drag obstructions (EDO)
    • Bed roughness height
    • Obstruction diameter
    • Obstruction height
  • "Ice friction (ICE, IRH, BRH)" – Applies as a pressure field on the water surface to account for the effects that stationary ice on the water surface has on the flow below.
    • Ice thickness
    • Ice density – Enter a value for the density of ice.
    • Ice movement
    • Ice roughness height – Enter a value for the equivalent ice roughness height.
    • Bed roughness height – Enter a value for the equivalent bed roughness height.
  • Dune friction (DUN)
    • Dune Factor
    • Dune SEDLIB Inclusion
    • Dune D50
    • Dune D90
• Include Seasonal Roughness Adjustment
  • Roughness adjustment factor

Transport

The Transport tab allows adjusting the tolerance for transport constituents going through the material. The tab requires that a transport constituent component to be selected.

AdH Simulation

Example of an AdH simulation in the Project Explorer

Simulations are available for AdH starting in SMS 13.3. A simulation should contain a 2D mesh and an AdH boundary conditions coverage, and optional AdH coverages. Right-clicking on the simulation will display options and dialogs.

To create a new simulation:

1. Right-click on empty space in the Project Explorer and select New Simulation | AdH. A new tree item will appear.
2. Drag and drop simulation components under the newly created simulation tree item . Components available include:
   • 2D mesh
   • Boundary Conditions coverage
   • Materials coverage

Multiple AdH simulations can be included in a single project.

Simulation Components

An AdH simulation uses the following components in the model run:

• 2D mesh – Any generic 2D mesh will work. Generally this mesh should be created from the Mesh Generation coverage.
• Boundary Conditions coverage – Contains arcs defining the boundary condition attributes for the model run.
• Materials coverage – Allows creating recording stations at specified nodal locations.
• Sediment Material coverage –

Each component can be added to the simulation by selecting the component and dragging it under the simulation item in the Project Explorer. Linked 2D mesh and coverages will be displayed under the simulation.

Linking Components

After a simulation has been created, components may be added to the simulation. Components are usually added by clicking on the component item in the Project Explorer and dragging the item under the AdH simulation. A link is then created between the component and the simulation.

Components can also be added to a simulation by right-clicking on the component in the project explorer and selecting the simulation name in the Apply To submenu. The Apply To submenu becomes available once a simulation has been created.

Components can be removed by right-clicking on the component link under the simulation and select Remove.

If a component is updated, it must be reapplied to the simulation.

Running the AdH Simulation

After all components have been added to the simulation and the model parameters have been established, the simulation can be run. This is done by right-clicking on the simulation and choosing the Run Simulation command or the Save and Run Simulation command.

The simulation run involves three steps.

1. Exporting the AdH files – SMS writes out an AdH folder in the same directory where the SMS project is saved. The AdH folder has several files which have mesh geometry information, and boundary conditions as well as model control information defined in the model.
2. Running AdH – After using a launch command, the Simulation Run Queue dialog will appear. If there are any errors in the model run, the model wrapper will exit early. The model run can also be exited early by clicking the Abort button. When the model run is completed, select Exit to close the model wrapper.

The Load solution button appears with the model run has finished. Clicking this button will load the solution into SMS.

AdH Model Control

The ADH Model Control dialog contains the graphical prompts for specifying model options. The dialog is accessed through the ADH | Model Control... menu item.

The dialog is divided into several tabs which each contain a number of parameter options. Before running ADH, set and review model control parameters. Entered data will be used to write the files employed in the ADH model run.

The available tabs are:

• Time – Specifies the simulation duration. By default, ADH uses transient conditions, but steady state simulations can be specified.
• Control Iteration – Specifies the level of precision for the conservation of mass and momentum.
• Control Operation –
• Model Control Output – Set parameters for how often solution data will be written.
• Control Constants –
• Hot Start –
• Interface – Allows maintaining options which are not otherwise supported by the SMS interface.

See the individual articles for each of the ADH model control tabs.

Time

Time tab of the ADH Model Control dialog

Time tab provides the following:

• Start time field
• Start time units numbered as seconds, minutes, hours, days, and weeks.
• End time field (with the defined start) specifies the simulation run length on the TC TF card.
• End time units numbered as seconds, minutes, hours, days, and weeks.
• Time step option lists one of three options:
  • Steady state solution (TC STD)
    • Steady state min time step size
    • Steady state max time step size
  • Time step series (SERIES DT)
    • Max time step size time series opens an XY Series Editor
  • Auto Time Step Find (TC ATF)
    • Auto time step find min time step size
    • Auto time step find max time step size series

Iteration

Iteration tab of the ADH Model Control dialog

The Iterations tab allows specifying the level of precision for the conservation of mass and momentum as ADH performs its calculations.

ADH solves conservation statements concerning water volume, momentum, and constituent mass. ADH is written in conservative form and thus can be regarded as both a finite element method and also a finite volume method. As such ADH can be shown to represent a sum of fluxes around the edge of an element to be in balance with the mass or volume change within the element. In the case of the momentum equation it will be a sum of fluxes and forces balancing the momentum change within an element.

ADH computes the water levels and velocities at each computation point in the domain for each time step in the simulation in an iterative process. At the end of each iteration, calculations are made to determine how much the solution is changing and what the errors in conservation are. If the errors are small, and the solution is not changing, the process is said to be converged and calculations can proceed to the next time step. If the solution is changing and/or the errors in conservation are large, ADH can attempt another iteration.

There are several iteration parameter controls in ADH. These are described in detail in the ADH users manual. The Advanced options tab controls the linear iterations. This dialog controls the non-linear iteration parameters.

At the end of each iteration ADH computes the conservation properties for the current approximations of water depth and velocity. If the errors are less than specified tolerance, the solver moves on to the next time step. If the errors are greater than the specified tolerance, but still reasonable, and the maximum number of iterations specified on the IP NIT card has not been reached, ADH will attempt another iteration. If the errors have become unreasonable (divergence), ADH will exit the loop with a failure notification. The controls in this dialog allow defining how ADH should determine convergence and how to proceed when convergence is not reached.

• Non Linear Iterations- In this edit field specify the maximum number of iterations that ADH will try for a single time step
• Non Linear Tolerance Options:

  • NTL (IP_NTL Card)

    If the "NTL" option is selected, ADH will check for non-linear convergence on the "maximum residual norm". An initial estimate for an appropriate tolerance value for a problem can be computed. This is the maximum allowance. It will likely be desirable to set the tolerance higher than this estimate so the simulation will progress.

    ITL (IP_ITL Card)

    If the ITL option is selected, ADH will check for non-linear convergence on the "maximum increment norm" or the change in the solution (velocity, depth and concentration).

    Both

    If the Both option is selected, SMS will write both cards to the BC file and ADH will check for convergence on both terms. Both must be satisfied for the solution to proceed.

• Non Linear Residual Tolerance
• Non Linear Incremental Tolerance
• Linear Iterations

Operation

Operation tab of the ADH Model Control dialog

Output

Output tab of the ADH Model Control dialog

ADH output files are specified in the ADH Model Control dialog (ADH | Model Control... command). It is accessed in the ADH Model Control window by clicking on the Output tab

ADH will write solution data at startup and at each time step specified in a XY1 series definition and referred to by the OC card. Flux data will be included with the solution data if output flow strings are specified (see assigning boundary conditions).

The following controls specify how often solution data will be written by ADH and the number of flux boundaries present.

• Output Control Options:
  • "Specify Autobuild (OS)"
  • "Specify Output Frequency (OC)"
  • "Output Control Units" This dropdown lets you choose seconds, minutes, hours, days, and weeks.
• Output Time Combo box specifies the time unit the list box will display the output times in.
• Add button includes the time information from the above radio group in the times list box. Duplicate times will be automatically removed from the list.
• Delete button removes the selected time(s) from the list box.
• Print adaptive mesh
• Print numerical fish surrogate
• Screen Output Residual
• Screen Output All
• Screen Output Mass Error Active

Constants

Constants tab of the ADH Model Control dialog

Kinematic Viscosity

Uniform background viscosity positive real number edit field

Gravitation acceleration positive real number edit field

Density positive real number edit field

• Enable Wetting/drying' is check box and the associated wetting and drying process. When this toggle is selected, ADH performs extra calculations for all cells with depth values less than the specified minimum to stabilize the process. As the specified depth value increases, extra calculations also increase and model performance decreases.

Hot Start

Hot Start tab of the ADH Model Control dialog

Advanced

ADH features not supported by SMS can be added in the ADH Model Control dialog (ADH | Model Control... command). It is accessed in the ADH Model Control dialog by clicking on the Advanced tab.

SMS includes support for many of the features in ADH, however, this list of features is a dynamic set. The user base of ADH includes a development team that is constantly experimenting with new options.

This window allows SMS to maintain the options that are not otherwise supported by the interface. For example, when SMS reads the BC file for an ADH simulation, and encounters a card that it does not recognize, that card is stored, verbatim, to a list of "Advanced Cards". That list is displayed in this window.

Enter cards in this dialog to experiment with other new features in the model. As those features are added to the list of supported features, they would automatically be moved to their own location in the model control the next time SMS reads the BC file.

Unsupported or advanced cards are written at the end of the BC file, just before the END card. This relies on the attribute of ADH that does not require any order dependence in the BC file.

Advanced tab of the ADH Model Control dialog

Model options not available in the interface can be specified under the Advanced tab. Each row in the spreadsheet will be saved as a different line in the *.bc file. The cards can be inserted and deleted using the Insert Row and Delete Row buttons.

• The lines will be written out exactly as typed.
• The lines will be written out in the order in which they appear in the dialog.
• Any lines encountered in a *.bc file that is not recognized will appear in this list.
• Lines beginning with a "!" character are treated as comment lines and will be skipped over during a read.
• Comment lines are automatically generated and will not be preserved.
• All of these advanced cards will be grouped together at the bottom of the file regardless of where they appeared during reading.

Related Topics

• ADH Model Control