SMS:SRH-2D Monitor Points Workflow

To use SRH-2D monitoring points, follow the steps below:

1. SRH-2D project setup.

1. Create a new SRH-2D simulation. After creating the components of a simulation, create a new SRH-2D simulation. Right-click in the Project Explorer and select the New Simulations | SRH-2D command. 2. Add SRH-2D simulation components. To link components to the simulation, do one of the following. Right-click on the component and select the simulation name from the Apply To submenu. In the Project Explorer, click and drag items under the simulation object. 3. Set SRH-2D model parameters. Right-click on the simulation and select the Model Control command. Set the model parameters in the SRH-2D Model Control dialog. 4. Run the SRH-2D simulation. Right-click on the SRH-2D simulation and select Save Project, Simulation and Run to run the simulation. Use the Simulation Run Queue to track the model run.

2. Create monitor points.
The monitor points must be defined before running the simulation. To do this: Create a monitor points coverage. Use the Create Feature Points tool to create monitor points in the coverage.

3. Add the monitor points to the simulation.
The monitoring points must be added ti the simulation before running SRH-2D. To do this: Create new simulation. Add components to simulation. Add the monitor points coverage to the simulation. Set up the simulation Model Control parameters.

4. Run the SRH-2D simulation.
Save the project. Check the model. Simulation execution. Troubleshooting.

5. Review results.
Results for the monitor points can be viewed by doing the following: Load solution files. Organize and view solution files in SMS.