GMS:Transform

From XMS Wiki
Revision as of 16:34, 21 August 2013 by Jcreer (talk | contribs)
Jump to navigationJump to search
Transform Dialog

The Transform command is used to move objects. In the Transform dialog, the transformation type can be chosen and then appropriate parameters can be entered. The following transformation types are available:

  • Scaling: Scaling factors for the X, Y, and/or Z directions are entered. To prevent scaling a specific direction, the default value of 1.0 should be used.
  • Translation: Translation values for the X, Y, and/or Z directions are entered. To prevent tranlation in a specific direction, the default value of 0.0 should be used.
  • Rotations: When rotation is selected, the set of options on the right side of the dialog become available to define the center of rotation around the Z axis. The rotation will occur counter-clockwise by the specified angle around the specified center of rotation.

By default, the image will be framed after the transformation takes place. However, this can be turned off by using the Frame image after transformation option.

See Coordinate Transformation