Projection Dialogs: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 45: Line 45:


The ''Projection'' drop-down contains the following options. If there is ''Zone'' information for a particular projection, it will be listed directly beneath the projection as an indented list:
The ''Projection'' drop-down contains the following options. If there is ''Zone'' information for a particular projection, it will be listed directly beneath the projection as an indented list:
{{Div col||10em}}
*"3TM (Alberta)"
*"3TM (Alberta)"
*"10TM (Alberta)"
*"10TM (Alberta)"
Line 156: Line 157:
*"Wisconsin County Reference System (WISCRS)"
*"Wisconsin County Reference System (WISCRS)"
*"WTM83/91 (Wisc. Transverse Mercator)"
*"WTM83/91 (Wisc. Transverse Mercator)"
{{Div col end}}


===Datum===
===Datum===

Revision as of 20:55, 10 September 2015

There are two main projection dialogs used in SMS, GMS< and WMS: The Display Projection dialog, and the Object Projection dialog. From each of these, the Select Projection dialog can be accessed. More detailed information about each projection and the information in these dialogs can be found in the Projections article.

Display Projection Dialog

File:DisplayProjection.jpg
Example of the Display Projection dialog.

The Display Projection dialog contains settings which are applied to the project as a whole.

Horizontal section

The Horizontal section of the dialog has two options available via radio buttons:

  • No projection - This option doesn't set a projection, and only allows adjusting the horizontal Units used in the project. The available units include:
    • "U. S. Survey Feet". Equal to 12003937 meters, approximately 0.3048006096 meters.
    • "International Feet". Equal to 0.3048 meters.
    • "Meters". Equal to the distance traveled by light in vacuum within 1299792458 of a second.
    • "Inches". Equal to 139.37 of a meter.
    • "Centimeters". Equal to 1100 of a meter.
  • Global projection - Clicking on the Set Projection button allows more specific projections to be set. These are listed below in the Select Projection Dialog section.

Vertical section

The Vertical section has two drop-down boxes:

  • Projection, giving the following options:
  • Units, giving the following options:
    • "U. S. Survey Feet"
    • "International Feet"
    • "Meters"
    • "Inches"
    • "Centimeters"

Object Projection Dialog

The Object Projection dialog is the same as the Display Projection dialog, but only applies to one specific object (e.g., a coverage or a mesh). It can be accessed by selecting the object in the Project Explorer, then right-clicking on it and selecting Projection... from the menu.

Select Projection Dialog

The Select Projection dialog.

The Select Projection dialog is accessed through the Set Projection... button in either the Display Projection dialog or the Object Projection dialog. It allows setting global projections for the project or for a specific object. It contains a single Projection tab with several options and sections.

All lists of drop-down selections are given in the order in which they appear in the drop-down.

Projection and Zone

To the right of the Projection drop-down are three buttons:

  • Load From File...: Allows a projection to be loaded from an external file. The accepted file formats are PRJ and SPR (PRJ is preferable).
  • Save to File...: Allows the projection information set in this dialog to be saved as a PRJ file.
  • Init from EPSG...: Opens a dialog where an EPSG Projection Code can be entered.


The Projection drop-down contains the following options. If there is Zone information for a particular projection, it will be listed directly beneath the projection as an indented list:

Datum

Planar Units

Parameters

In the Parameters section, the Attribute and Value columns contain information specific to the Projection and Zone selected.