SMS:GenCade Model Control Dialog: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "The Gencade Model Control dialog is used to set beach conditions, lateral boundary conditions and general simulation options. This document highlights the more commonly used opti...")
 
 
(49 intermediate revisions by the same user not shown)
Line 1: Line 1:
The Gencade Model Control dialog is used to set beach conditions, lateral boundary conditions and general simulation options. This document highlights the more commonly used options. Refer to the [http://cirp.usace.army.mil/wiki/GenCade GenCade web site] for a more detailed description of how these parameters affect the model results.  
The ''Gencade Model Control'' dialog is used to set beach conditions, lateral boundary conditions and general simulation options. This document highlights the more commonly used options. Refer to the [http://cirp.usace.army.mil/wiki/GenCade GenCade web site] for a more detailed description of how these parameters affect the model results.  


==Model Setup Tab==
==Model Setup Tab==
The following parameters are specified in the model setup tab:  
[[Image:GenCade MC Setup.png|thumb|400 px|''GenCade Model Control'' dialog showing the ''Model Setup'' tab]]
* Simulation Title  
The following parameters are specified in the ''model setup'' tab:  
* Simulation start and end time
*''Simulation''
* Simulation time step  
** ''Title'' – Title of simulation run.
* Recording time step  
** ''Full print output'' – Path and name of printed output file.
*''Computational Time''
** ''Start Date'' – Simulation start date.
** ''End Date'' – Simulation end date.
** ''Time Step'' – Model time step in hours.
** ''Recording Time Step'' – Recorded model time step in hours.
* ''Print Dates'' – Dates to save simulated shoreline. Use the '''Add''' button to create dates and the '''Remove''' button to delete any unwanted dates.


==Beach Setup Tab==
==Beach Setup Tab==
The following parameters are specified in the beach setup tab:  
The following parameters are specified in the ''beach setup'' tab:  
* Sand and Beach Data  
* ''Sand and Beach Data ''
** Effective Grain Size  
** ''Effective Grain Size'' – Medium sediment grain size in millimeters.
** Average Berm Height  
** ''Average Berm Height'' – In meters.
** Closure Depth  
** ''Closure Depth'' – In meters.
* Longshore Sand Transport Calibration Coefficients  
* ''Longshore Sand Transport Calibration Coefficients ''
**K1  
**''K1'' &ndash; 0.1<K1<1
** K2  
** ''K2'' &ndash; 0.5K1<K2<1.5K1
 
[[Image:GenCade MC Beach.png|thumb|none|left|400 px|''GenCade Model Control'' dialog showing the ''Beach Setup'' tab]]


==Seaward BC Tab==
==Seaward BC Tab==
The following parameters are specified in the seaward boundary condition tab:  
[[Image:GenCade MC Seaward.png|thumb|400 px|''GenCade Model Control'' dialog showing the ''Seaward BC'' tab]]
* Input Wave Adjustments  
The following parameters are specified in the ''seaward boundary condition'' tab:  
** Height Amplification Factor  
* ''Input Wave Adjustments'' &ndash; This section contains the following options:
** Angle Amplification Factor  
** ''Height Amplification Factor''
** Angle Offset  
** ''Angle Amplification Factor ''
* Wave Components to Apply (Primary or Primary & Secondary)
** ''Angle Offset ''
* Number of Cells in Offshore contour Smoothing Window  
* ''Wave Components to Apply'' &ndash; options include "Primary (1)" or "Primary & Secondary".
* ''Number of Cells in Offshore contour Smoothing Window'' &ndash; Default value is 11, but it is suggested that this number range between 11 and 101.


==Lateral BC Tab==
==Lateral BC Tab==
The following parameters are specified in the lateral boundary condition tab for the left and right lateral boundary condition:  
The following parameters are specified in the ''lateral boundary condition'' tab for the left and right lateral boundary condition:  
* Type  
* ''Type'' &ndash; Determines one of three boundary types:
** Pinned  
** "Pinned" &ndash; Boundary will not move from the initial shoreline position.
** Moving  
** "Moving" &ndash; Represents the amount of shoreline change at a boundary over a specified period of time.
*** Shoreline Displacement Velocity  
*** ''Shoreline Displacement Velocity'' &ndash; Shoreline can be displaced over the "Simulation Period", "Day", or "Time Step".
**Gated  
** "Gated" &ndash; Bounded with a groin. Requires that a groin exist and must be located in cell 1.
*** Length of Groin from Shoreline to Seaward Tip  
*** ''Length of Groin from Shoreline to Seaward Tip''


[[Image:GenCade MC Lateral.png|thumb|none|left|400 px|''GenCade Model Control'' dialog showing the ''Lateral BC'' tab]]
==Adaptive Time Steps Tab==
[[File:GenCade MC Adaptive.png|thumb|400 px|''GenCade Model Control'' dialog showing the ''Adaptive Time Steps'' tab]]
The following parameters are specified in the adaptive time steps tab:
*''Use adaptive time steps'' &ndash; If turned on, allows the option to use the default values or set custome values.
*''Use defaults'' &ndash; If turned on, the default values will be used. If turned off, the following can be set:
**''Threshold minimum''
**''Threshold maximum''
**''Number of days stable''
**''Stability minimum''
**''Stability maximum''


==Related Topics==
==Related Topics==
* [[SMS:GenCade|GenCade]]
* [[SMS:GenCade|GenCade]]
{{Template:Navbox SMS}}
[[Category:GenCade Dialogs|M]]
[[Category:GenCade|M]]
[[Category:SMS Model Control|G]]
[[Category:SMS Boundary Conditions|G]]

Latest revision as of 15:34, 8 July 2019

The Gencade Model Control dialog is used to set beach conditions, lateral boundary conditions and general simulation options. This document highlights the more commonly used options. Refer to the GenCade web site for a more detailed description of how these parameters affect the model results.

Model Setup Tab

GenCade Model Control dialog showing the Model Setup tab

The following parameters are specified in the model setup tab:

  • Simulation
    • Title – Title of simulation run.
    • Full print output – Path and name of printed output file.
  • Computational Time
    • Start Date – Simulation start date.
    • End Date – Simulation end date.
    • Time Step – Model time step in hours.
    • Recording Time Step – Recorded model time step in hours.
  • Print Dates – Dates to save simulated shoreline. Use the Add button to create dates and the Remove button to delete any unwanted dates.

Beach Setup Tab

The following parameters are specified in the beach setup tab:

  • Sand and Beach Data
    • Effective Grain Size – Medium sediment grain size in millimeters.
    • Average Berm Height – In meters.
    • Closure Depth – In meters.
  • Longshore Sand Transport Calibration Coefficients
    • K1 – 0.1<K1<1
    • K2 – 0.5K1<K2<1.5K1
GenCade Model Control dialog showing the Beach Setup tab

Seaward BC Tab

GenCade Model Control dialog showing the Seaward BC tab

The following parameters are specified in the seaward boundary condition tab:

  • Input Wave Adjustments – This section contains the following options:
    • Height Amplification Factor
    • Angle Amplification Factor
    • Angle Offset
  • Wave Components to Apply – options include "Primary (1)" or "Primary & Secondary".
  • Number of Cells in Offshore contour Smoothing Window – Default value is 11, but it is suggested that this number range between 11 and 101.

Lateral BC Tab

The following parameters are specified in the lateral boundary condition tab for the left and right lateral boundary condition:

  • Type – Determines one of three boundary types:
    • "Pinned" – Boundary will not move from the initial shoreline position.
    • "Moving" – Represents the amount of shoreline change at a boundary over a specified period of time.
      • Shoreline Displacement Velocity – Shoreline can be displaced over the "Simulation Period", "Day", or "Time Step".
    • "Gated" – Bounded with a groin. Requires that a groin exist and must be located in cell 1.
      • Length of Groin from Shoreline to Seaward Tip
GenCade Model Control dialog showing the Lateral BC tab

Adaptive Time Steps Tab

GenCade Model Control dialog showing the Adaptive Time Steps tab

The following parameters are specified in the adaptive time steps tab:

  • Use adaptive time steps – If turned on, allows the option to use the default values or set custome values.
  • Use defaults – If turned on, the default values will be used. If turned off, the following can be set:
    • Threshold minimum
    • Threshold maximum
    • Number of days stable
    • Stability minimum
    • Stability maximum

Related Topics