User:Jcreer/SMS:Datasets to Rasters: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 10: Line 10:
**''Datset Name'' – This column lists the dataset name as nameed in the Project Explorer.  
**''Datset Name'' – This column lists the dataset name as nameed in the Project Explorer.  
**''Raster File Name'' – This column gives the name of raster that will be created. Click on the name allows the name to be changed.
**''Raster File Name'' – This column gives the name of raster that will be created. Click on the name allows the name to be changed.
The bottom of the dialog defines the resolution/pixel size of the rasters to be created. There are two options for specifying this resolution
The bottom of the dialog defines the resolution/pixel size of the rasters to be created. There are two options for specifying this resolution
 
*''Define geometry from selected raster'' – Allows choosing an existing raster/DEM.  Each raster has its own pixel size, origin and extents. If no raster is selected, or the toggle box is not checked this option will not be used. If used, the pixel size will come from the selected raster.
Option 1: User chooses an existing raster/DEM.  Each raster has its own pixel size, origin and extents. If the option to "Define geometry from selected raster " is specified, the user can then click the "Select" button to choose a raster loaded into the SMS session.
**''Raster'' – Lists the raster being used if a raster has been selected.
 
***'''Select...'''– Opens a selection browser to select an existing raster.
If no raster is selected, or the toggle box is not checked this option will not be used. If used, the pixel size will come from the selected raster.


Option 2: The minimum of the bounding box of the geometry is set as the origin of the new rasters.  The new rasters cover the bounding box of the geometry. The user can specfify the number of pixels in x, y, or the size of the pixels. The other two values are computed to be compatible.  
Option 2: The minimum of the bounding box of the geometry is set as the origin of the new rasters.  The new rasters cover the bounding box of the geometry. The user can specfify the number of pixels in x, y, or the size of the pixels. The other two values are computed to be compatible.  

Revision as of 20:58, 8 December 2020

Example of the Datasets to Rasters dialog

The Datasets to Rasters tool converts a spatial dataset on an unstructured grid to a raster object (TIF file) that can be used in general GIS applications. The tool is accessed by right-clicking on an SRH-2D simulation in the Project Explorer then selecting Tools | Datasets to rasters.... The Datasets to Rasters dialog will then appear.

Datasets to Rasters Dialog

The Datasets to Rasters dialog contains the following options:

  • Select dataset(s) to convert – A table with three columns.
    • Select – This column contains a toggle box to select which datasets should be converted to rasters.
    • Datset Name – This column lists the dataset name as nameed in the Project Explorer.
    • Raster File Name – This column gives the name of raster that will be created. Click on the name allows the name to be changed.

The bottom of the dialog defines the resolution/pixel size of the rasters to be created. There are two options for specifying this resolution

  • Define geometry from selected raster – Allows choosing an existing raster/DEM. Each raster has its own pixel size, origin and extents. If no raster is selected, or the toggle box is not checked this option will not be used. If used, the pixel size will come from the selected raster.
    • Raster – Lists the raster being used if a raster has been selected.
      • Select...– Opens a selection browser to select an existing raster.

Option 2: The minimum of the bounding box of the geometry is set as the origin of the new rasters. The new rasters cover the bounding box of the geometry. The user can specfify the number of pixels in x, y, or the size of the pixels. The other two values are computed to be compatible.

of datasets that exist for the geometry (mesh/grid) associated with the selected simulation. This may include the output from multiple simulations that use the same geometry.

Input/Operation:

  • Select/check the toggle box(es) on the left side o the table to define which datasets should be converted to rasters (for the current time step).
  • The user can also click on any cell in the third column of the table to specify the name for the raster that will be created from the dataset associtated with that row of the tabble.
  • Click Ok to invoke the command, create the rasters, and have them loaded into the current session of SMS.

Related Topics

  • Create depth raster (right-click on a DEM in GIS module)