MODFLOW Calibration Using Wells Pumping Rate Workflow
From XMS Wiki
(Redirected from MODFLOW Manually Edit the Drawdown Workflow)
This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search
This is the approved revision of this page, as well as being the most recent.
A well pumping rate can be used to calibrate a MODFLOW model. This can be used for projects involving dewatering. This requires create well with actual pumping rate (negative for extraction). To calibrate an existing MODFLOW model using the well pumping rate, use the following steps:
1. Define MODFLOW parameters. |
---|
|
2. Define well options. |
---|
|
3. Set calibration parameters. |
---|
|
4. Create head observations in the Map module. |
---|
|
5. Run MODFLOW. |
---|
|
GMS – Groundwater Modeling System | ||
---|---|---|
Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids | |
Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
Aquaveo |