Horizons with Rasters Workflow

From XMS Wiki
(Redirected from Rasters to Solids Workflow)

This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search

To use rasters to generate solids, use the following steps:

1. Import project data.
1. Import raster data.
  1. Use the File | Open... command to import GIS data files such as Shapefiles or raster files.
  2. Alternatively, drag and drop the file into the Graphics Window in GMS.
2. Import TIN elevation (optional).
  1. Use the File | Open... command to import TIN files.
  2. Alternatively, drag and drop the file into the Graphics Window in GMS.
    • Note: TINs can also be generated in GMS using scatter point elevation data.
2. Use the 3D UGrids from Rasters tool.
  1. Access the 3D UGrid from Rasters tool in the Toolbox Toolbox macro.png.
  2. Add rasters to the table and select options.
  3. Run the tool.


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=Horizons_with_Rasters_Workflow&oldid=118558"