SMS:CMS-Wave Monitoring Station Output File
From XMS Wiki
(Redirected from SMS:CMS-Wave Monitoring Output File)
Jump to navigationJump to search
CMS-Wave can include monitoring stations that will extract the calculated data values, including the wave height, period and direction. The extracted values are stored in the CMS-Wave monitoring station output file (selhts.out) generated during the model run. This file will only be created if a monitoring station data is specified in the control file. In SMS, monitoring stations are created as a cell attribute in the Cartesian grid.
File Format
The selhts.out file uses a fifteen column format with values described in the table below:
Column Number Value 1 Spectrum label (or time stamp) 2 I index in Cartesian (i,j) or ij index in quadtree mesh 3 J index in Cartesian (i,j) or 0 (dummy) in quadtree mesh 4 Significant wave height (meters) 5 Spectral peak wave period (seconds) 6 Mean wave direction (degrees, local coordinate system) 7 Swell height (meters) 8 Swell wave period (seconds) 9 Swell direction (degrees) 10 Local-generated wave height (meters) 11 Local-generated wave period (seconds) 12 local-generated wave direction (degrees) 13 Wave breaking index (non-zero for breaking) 14 Max water elevation mark (meters), include wave run-up if calculated 15 Flow discharge rate (m*m/sec) at structure cells if calculated
Example
Below is an example of the selhts.out text file.
1 50 70 1.036 20.00 23.2 0.00 0.00 0.0 0.00 0.00 0.0 0 0.518 0.00
1 92 66 0.763 20.00 -13.9 0.00 0.00 0.0 0.00 0.00 0.0 0 0.382 0.00
1 110 60 0.169 20.00 -8.2 0.00 0.00 0.0 0.00 0.00 0.0 0 0.085 0.00
2 50 70 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
2 92 66 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
2 110 60 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
3 50 70 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
3 92 66 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
3 110 60 0.010 1.00 0.0 0.00 0.00 0.0 0.00 0.00 0.0 0 0.005 0.00
Related Topics
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
