GMS:Assign Node/Face BC: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{FEMWATER Links}}
{{FEMWATER Links}}
The '''''Assign Node/Face BC''''' command in the ''FEMWATER'' menu is used to either assign a new boundary condition or edit an existing boundary condition to a selected set of boundary nodes or boundary element faces. The dialog that appears depends on whether nodes or faces are selected.
The '''Assign Node/Face BC''' command in the ''FEMWATER'' menu is used to either assign a new boundary condition or edit an existing boundary condition to a selected set of boundary nodes or boundary element faces. The dialog that appears depends on whether nodes or faces are selected.


===Nodal Boundary Conditions===
===Nodal Boundary Conditions===
If a set of nodes is selected when the '''''Assign Node/Face BC''''' command is selected, the Node BC dialog appears. Boundary conditions assigned to nodes correspond to Dirichlet boundary conditions. Both head and concentration can be specified.
If a set of nodes is selected when the '''Assign Node/Face BC''' command is selected, the ''Node BC'' dialog appears. Boundary conditions assigned to nodes correspond to Dirichlet boundary conditions. Both head and concentration can be specified.


=====Head=====
====Head====
Head boundary conditions in FEMWATER are assigned as total head. FEMWATER converts the total heads to pressure heads internally. Heads can be specified as a constant value or as a transient value (curve of head vs. time).
Head boundary conditions in FEMWATER are assigned as total head. FEMWATER converts the total heads to pressure heads internally. Heads can be specified as a constant value or as a transient value (curve of head vs. time).


The Load Data Set button can be used to assign the head values from a data set. For example, if the Elevation data set is selected, the head is set equal to the node elevation at each of the selected nodes.
The '''Load Dataset''' button can be used to assign the head values from a dataset. For example, if the elevation dataset is selected, the head is set equal to the node elevation at each of the selected nodes.


=====Concentration=====
====Concentration====
The concentration can also be specified as either a constant or transient value. Since the concentration is a Dirichlet boundary condition, it represents a fixed concentration at the node. It does not represent the concentration of the incoming fluid.
The concentration can also be specified as either a constant or transient value. Since the concentration is a Dirichlet boundary condition, it represents a fixed concentration at the node. It does not represent the concentration of the incoming fluid.


=====Face Boundary Conditions=====
====Face Boundary Conditions====
If a set of faces is selected when the '''''Assign Node/Face BC''''' command is selected, the Face BC dialog appears. Boundary conditions assigned to faces are flux-type boundary conditions. Both flux and concentration can be assigned independently. In both cases, the type must be designated as either Variable, Flux (Cauchy), or Flux gradient (van Neumann). The value can be defined as a constant or transient value.
If a set of faces is selected when the '''Assign Node/Face BC''' command is selected, the ''Face BC'' dialog appears. Boundary conditions assigned to faces are flux-type boundary conditions. Both flux and concentration can be assigned independently. In both cases, the type must be designated as either variable, flux (Cauchy), or flux gradient (van Neumann). The value can be defined as a constant or transient value.


Existing boundary conditions can be deleted by selecting the boundary condition with the [[GMS:3D Mesh Tool Palette|Select Boundary Nodes]], [[GMS:3D Mesh Tool Palette|Select Boundary Faces]], or [[GMS:3D Mesh Tool Palette|Select Wells]] tool and selecting the '''''Delete BC''''' command from the ''FEMWATER'' menu.
Existing boundary conditions can be deleted by selecting the boundary condition with the [[GMS:3D Mesh Tool Palette|'''Select Boundary Nodes''']], [[GMS:3D Mesh Tool Palette|'''Select Boundary Faces''']], or [[GMS:3D Mesh Tool Palette|'''Select Wells''']] tool and selecting the '''Delete BC''' command from the ''FEMWATER'' menu.


{{Navbox GMS}}
{{Navbox GMS}}
[[Category:FEMWATER]]
[[Category:FEMWATER]]

Latest revision as of 15:54, 17 August 2017

FEMWATER
Meshgenc.png
Pre-processing
Building a FEMWATER Model
FEMWATER Model Input
Saving a FEMWATER Simulation
Post-processing
FEMWATER Display Options
FEMWATER Post-Processing Viewing Options
Tutorials
FEMWATER Tutorials
v • e

The Assign Node/Face BC command in the FEMWATER menu is used to either assign a new boundary condition or edit an existing boundary condition to a selected set of boundary nodes or boundary element faces. The dialog that appears depends on whether nodes or faces are selected.

Nodal Boundary Conditions

If a set of nodes is selected when the Assign Node/Face BC command is selected, the Node BC dialog appears. Boundary conditions assigned to nodes correspond to Dirichlet boundary conditions. Both head and concentration can be specified.

Head

Head boundary conditions in FEMWATER are assigned as total head. FEMWATER converts the total heads to pressure heads internally. Heads can be specified as a constant value or as a transient value (curve of head vs. time).

The Load Dataset button can be used to assign the head values from a dataset. For example, if the elevation dataset is selected, the head is set equal to the node elevation at each of the selected nodes.

Concentration

The concentration can also be specified as either a constant or transient value. Since the concentration is a Dirichlet boundary condition, it represents a fixed concentration at the node. It does not represent the concentration of the incoming fluid.

Face Boundary Conditions

If a set of faces is selected when the Assign Node/Face BC command is selected, the Face BC dialog appears. Boundary conditions assigned to faces are flux-type boundary conditions. Both flux and concentration can be assigned independently. In both cases, the type must be designated as either variable, flux (Cauchy), or flux gradient (van Neumann). The value can be defined as a constant or transient value.

Existing boundary conditions can be deleted by selecting the boundary condition with the Select Boundary Nodes, Select Boundary Faces, or Select Wells tool and selecting the Delete BC command from the FEMWATER menu.

v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:Assign_Node/Face_BC&oldid=127969"